F-8017C1
8-channel Isolated Current Input Redundant Module for DCS systems, 500 Samples/sec sampling rate, supports operating temperatures from -25°C~ +75°C
Features
The F-8017C1 is a 16-bit, 8-channel analog differential input module. This module accepts current input range 4~20mA and supports 25% over range measurement (Accuracy is not guaranteed). Besides, it has ±0.05% accuracy for highly accurate application. Moreover, this module provides 500Hz sampling rate for some application. The F-8017C1 provides 3000VDC optical isolation between channels and backplane bus. If any high voltage or current damages these channels, this module won’t affect other component in iDCS-8000 system.
- 8 current input channels
- Overrange measurement
- RoHS compliance
- 3000 VDC isolation from input to backplane
- 3000 VDC isolation from input to frame ground
- Redundancy
- Fast redundant switching time (<100us)
Applications
- Building Automation
- Factory Automation
- Machine Automation
- Remote Maintenance
- Remote Diagnosis
- Testing Equipment
Specifications
Feature | ||
Redundant | Yes (Switching time < 100us) | |
Over-Current Protection | Yes | |
Termination board break off detection | Yes | |
LED indicator | 1 RUN, 1 ACT, 1 DUX | |
Analog Input | ||
Number of channels | 8 | |
Type | 4 ~ 20 mA (Support ±25% overrange | |
Maximum Allowable Input Current | 25 mA | |
Resolution | 16 bit | |
Sampling Rate | 500 Samples/sec(Total) | |
Accuracy | ±0.05% FSR | |
Zero Drift | ±20 μV/°C | |
Common Mode Rejection | 86 dB | |
Normal Mode Rejection | 100 dB | |
Input Impedance | 230 Ω | |
Data Range | -2500~12500 (0 ~ 24 mA) | |
Isolation | 3000 VDC | |
Certification | ||
EMC | EN61000-6-2, EN61000-6-4, IEC/EN 61000-4-2, IEC/EN 61000-4-4 | |
General | ||
Termination board | DN-AIO-M | |
Maximum power consumption | 1.5 W | |
Operating temperature | -25°C~ +75°C | |
Humidity | 5 ~ 95 % RH, Non-condensing | |
Weight | 300 g | |
Dimensions (W x L x H) | 30 mm x 85 mm x 115 mm |