FCM-MTCP
Field Communication Module with Modbus TCP slave for DCS Systems, supports operating temperatures from -25 °C ~ +75 °C
Features
The FCP-MTCP is a communication module for the iDCS-8000 system. It supports Modbus/TCP slave, most well-known industrial protocol, for the PLCs or controllers which support Modbus/TCP master. This module also offers LED to indicate system diagnostic and Ethernet connection status locally. Besides, two rotary switches are provided to instant configure ID (IP address) for other FCM-MTCP. Moreover, the module offers 1000 VDC isolation between channels and backplane bus. If any high voltage or current damages the channels, the system (backplanes, other modules, and control unit) won't be affected because the benefit of isolation.
- Modbus/TCP slave
- Hot-swappable
- Allow 4 connection access simultaneously
- RoHS compliance
- 1000 VDC isolation
- Redundancy
Applications
- Building Automation
- Factory Automation
- Machine Automation
- Remote Maintenance
- Remote Diagnosis
- Testing Equipment
Specifications
Feature | ||
Redundant | Yes (Two Modbus/TCP slave with two different IP address) | |
Ethernet link broken detection | Yes | |
64-bit hardware serial number | Yes | |
Watchdog timer | Yes | |
LED indicator | 1 RUN, 1 HF, 1 LF, 1 Link, 1 Act | |
Hardware | ||
CPU | 80186 or compatible (16-bit, 80MHz) | |
SRAM | 512 Kbytes | |
Flash | 512 Kbytes, 100,000 erase/write cycles | |
EEPROM | 16 Kbytes, 1,000,000 erase/write cycles | |
Communication Interface | ||
RJ-45 port | 10/100Base-T(X), Auto negotiating, Auto MDI/MDI-X | |
IP address | Configurable through two rotary switches | |
Protocol | Modbus/TCP slave (Allow 4 connection access simultaneously) | |
Certification | ||
EMC | EN61000-6-2, EN61000-6-4 IEC/EN 61000-4-2, IEC/EN 61000-4-4 |
|
General | ||
Maximum power consumption | 2.1 W @ 24 VDC | |
Operating temperature | -25 °C ~ +75 °C | |
Humidity | 5 ~ 95 % RH, Non-condensing | |
Weight | 300 g | |
Dimensions (W x L x H) | 30mm x 85mm x 115mm |