References & Support
Features
This product is phased out and replaced by PIO-D64U
The PIO-D64 provides 32 digital input channels, 32 output channels and 6 counter/timer channels. The PIO-D64 consists of two 16-bit input ports and two 16-bit output ports. Users can use the DB-16P to connect the input ports (CN2 and CN4) for isolation purposes. The DB-16R can be used to interface the output ports (CN1 and CN3) for relay control. There are four-clock sources: 2M, 1M, 500K and 250K on the board; users can use the clock sources from the soldering pad. The on board timer / counter provides 3 channels for frequency measurement, event counting and pulse generation. The second 8254 provides 3 channels for interrupt function. It can be installed in a 5V PCI bus and can support true "Plug & Play".
- Double side SMT, short card
- Provides four 20-pin flat cable connector to DB-16P, DB-16R daughter board
- 32-bit digital input Lines and 32-bit digital output lines
- One 16-bit counter and One 32-bit counter with 4 Mhz time base
- 3 independent programmable 16-bit down counter
- Programmable interrupt handling
- Five 20-pin headers
- Output status readback
- Interrupt trigger by: Even / Timer trigger
- DIO response time is about 0.77 us (1.3 MHz max.)
- Software:
- Toolkit for DOS
- Toolkit for Windows 95/98
- Toolkit for Windows NT
- Toolkit for Windows 2000/XP
- LabVIEW toolkit for Windows
- Toolkit for OCX 95/98
- Toolkit for OCX NT
- Toolkit for OCX 2000/XP
- Driver for LINUX
- Driver for DasyLab
Specifications
- All inputs are TTL compatible
- Logic high voltage: 2.4V ( Min. )
- Logic low voltage: 0.8V ( Max. )
- All outputs are TTL compatible
- Sink current: 24 mA ( Max. )
- Source current: 15 mA ( Max. )
- Power consumption: +5V @ 580mA
- General Environment:
- Operating Temperature: 0° to 60°C
- Storage Temperature : -20°C to 80°C
- Humidity: 0 to 90 % non-condensing
- Dimensions : 156mm x 110mm