NSM-208PSE-4
8-Port Industrial 10/100 Mbps Ethernet with 4-PoE (PSE) Switch, Metal Case
Features
Introduction
The NS-208PSE-4/NSM-208PSE-4 is an 8-port unmanaged Ethernet with 4-PoE (Power-over-Ethernet) switch, it supports 4-PoE port which are classified as power source equipments (PSE).The NS-208PSE-4/NSM-208PSE-4 makes centralized power supply come true and provides up to 15.4 watts of power per port. The NS-208PSE-4/NSM-208PSE-4 can be used to power IEEE802.3af compliant powered devices (PD) by Ethernet cable and eliminates the need for additional power wiring.
Features
- Automatic MDI/MDI-X crossover for plug-and-play
- Each port supports both 10/100Mbps speed auto negotiation
- Store-and-forward architecture
- Full duplex IEEE 802.3x and half duplex backpressure flow control
- 4 PoE ports with Power Sourcing Equipment (PSE) operation
- Auto-detection of PD (powered devices) and automatic power management
- Over-temperature, over-current and over/under-voltage detection
- Supports operating temperatures from –40 ~ +75°C
- DIN-Rail
Specifications
Technology | |
Standards | IEEE 802.3, 802.3u, 802.3x ,802.3af (Power over Ethernet) |
Processing Type | Store & forward, wire speed switching |
MAC Addresses | 1024 |
Memory Bandwidth | 3.2 Gbps |
Frame Buffer Memory | 512 Kbit |
Flow Control | IEEE802.3x flow control, back pressure flow control |
Interface | |
RJ-45 Ports | 10/100 Base-T(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection |
LED Indicators | Power, Link/Act , Power Device is detected |
Ethernet Isolation | 1500 Vrms 1 minute |
+/-6 kV EMS Protection | Yes |
Power Input | |
Input Voltage Range | +46 ~ +55 VDC for PoE output |
Power Consumption | 0.12 A @ 48 VDC with PoE Off |
Protection | Power reverse polarity protection |
Frame Ground for EMS Protection | Yes |
Connection | 3-Pin Removable Terminal Block |
PoE Output | |
PoE Compliance | 100% IEEE 802.3af compliant |
PoE Classification | PSE (Power Sourcing Equipment) |
PoE Voltage | +46 ~ +55 VDC depending on power input |
PoE Power | Up to 15.4 watts per channel |
PoE Operation | Automatic detection and power management |
Mechanical | |
Casing | Metal (IP30 Protection) |
Dimensions (W x L x H) | 25 mm x 168 mm x 119 mm |
Installation | DIN-Rail |
Environmental | |
Operating Temperature | -40 °C ~ +75 °C |
Storage Temperature | -40 °C ~ +85 °C |
Ambient Relative Humidity | 10% ~ 90% RH, non-condensing |