The FR-2152T/FR-2152TA has 8-channel isolated photo-coupler input and the transfer speed is fixed at 1M bps. The default signal connector of FR-2152T/FR-2152TA is a 12-pin 0.15” screw terminal connector. FR-2152T and 2152TA each apply respectively to NPN-type and PNP-type discrete output modules.
According to different applications, the users can choose suitable modules. The FR-2100 I/O module has a FRNet interface. The users can daisy chain several FR-2100 modules together. Via FRNet, the FR-2100 modules can extend the discrete I/O control of PC and PAC easily. For further information about the networking of FR-2100 series; please refer to literature related to I-7188EF, I-8172, FRB-200.
|6P4C RJ-11 modular connector with Cat.3 cable (2P twisted-pair cable) for easy wiring( When different cables are used, the transmission distance may change).|
|Power consumption||2.0 W (Max.)|
|Power requirement||12-24 V DC|
|Operating temperature||-25°C to +65 °C|
|Operating humidity||10% ~ 95% RH, non-condensing|
|Storage temperature||-30°C to +85°C|
|Storage humidity||5% ~ 95% RH, non-condensing|
|Dimensions||99 mm x 32 mm x 83 mm|
|Input Isolation||1 KVdc|
|Input Impedance||4.7 K Ohm|
|Input points||8 channels|
|Input Voltage range||Logic H: 10~24 V|
|Logic L: 0~3 V|
|Response Time||Turn-On delay time: less than 0.15 ms|
|Turn-Off delay time: less than 0.05 ms|
|Transmission||Transfer speed:1 M bps|
|Cyclic scan time:0.72 ms|
|Transfer distance:Max. 100 m|
32-channel FRNet Rel...
8-channel FRNet Disc...
16-channel FRNet Iso...
8-channel FRNet Isol...
16-Channel FRNet Iso...
16-channel FRNet Sin...