4 Channel Relay Output & 4 Channel Isolated Digital Input Data Acquisition Module communicable over Modbus RTU and RS-485, supports operating temperatures from -25 to 75°C

M-7060

4 Channel Relay Output & 4 Channel Isolated Digital Input Data Acquisition Module communicable over Modbus RTU and RS-485, supports operating temperatures from -25 to 75°C

  Price:  $179.00  

Features

intro

The M-7000 series is a family of network data acquisition and control modules that support Modbus RTU. They can be remotely controlled using a set of commands called DCON protocol. With the Modbus RTU protocol, it can easily communicate with most popular SCADA/ HMI software and PLCs.

  • Communication Via ModBus Protocol
  • Channels: 4
  • Four isolated channels with common power
  • Relay output
  • Two form relay
  • SPST (N.O.)
  • Two form relay
  • SPDT
  • Dry contact
  • Din Rail Mount

Specifications

Communication
Interface RS-485 Modbus RTU, DCON
Format (N, 8, 1), (N, 8, 2), (E, 8, 1), (O, 8, 1)
Baud Rate 1200 ~ 115200 bps
Protocol Modbus RTU, DCON
Dual Watchdog Yes, Module (1.6 Seconds), Communication (Programmable over Modbus RTU)
LED Indicators/Display
System LED Indicator Yes, 1 LED as Power/Communication Indicator
I/O LED Indicators -
Yes, 8 LEDs as Digital Input/Relay Output Indicators
7-Segment LED Display -
Isolation
Intra-Module Isolation, Field-to-Logic 3750 VDC
EMS Protection
ESD (IEC 61000-4-2) ±4 kV Contact for each Terminal
±8 kV Air for Random Point
EFT (IEC 61000-4-4) ±2 kV for Power Line
Surge (IEC 61000-4-5) -
Protocol
Support Modbus and DCON Protocol Yes
Power
Reverse Polarity Protection Yes
Input Range 10 ~ 30 VDC
Consumption 1 W
Mechanical
Dimensions ( W x L x H) 72 mm x 123 mm x 35 mm
Installation DIN-Rail or Wall Mounting
Environment
Operating Temperature -25 ~ +75°C
Storage Temperature -40 ~ +85°C
Humidity 10 ~ 95% RH, Non-condensing

I/O Specifications

Relay Output
Channel 4 (Form A x 2, Form C x 2)
Relay Type Single Relay
Form A Relay Contact Rating 0.6 A @ 125 VAC
2 A @ 30 VDC
Min. Contact Load 10uA @ 10 mV
Contact Material Gold-plated silver
Operate Time 3 ms
Release Time 2 ms
Mechanical Endurance 1 x 10^8 ops.
Electrical Endurance 5 x 10^5 ops.
Form C Relay Contact Rating 0.6 A @ 125 VAC
2 A @ 30 VDC
Min. Contact Load 10 uA @ 10 mV
Contact Material Gold-plated silver
Operate Material 3 ms
Release Time 2 ms
Mechanical Endurance 1 x 10^8 ops.
Eletrical Endurance 5 x 10^5 ops.
Surge Strength 1500 VDC
Power-on Value Yes
Safe Value Yes
Digital Input/Counter
Channel 4
Type Dry Contact 0
Wet Contact Sink/source
On Voltage Level +1 VDC Max.
Off Voltage Level +4 ~ 30 VDC
Counters Max Count 65535 (16-bit)
Max. Input Frequency 100 Mhz
Min. Pulse Width 5 ms
Input Impedance 3 kΩ
Overvoltage Protection +/-35 VDC

Related Products


ICP DAS USA,Inc.