ISO-730
ISA Board with 16 Channels of Isolated Current Input, 16 Channels of Isolated Open-Collector Output, 16 Channels of Digital Input, and 16 Channels of Digital Output. Includes CA-4002 D-Sub connector cable. ISO-730 is phased out and replaced by PISO-730U.
Features
The ISO-730 has officially been phased out and will no longer be available. It has now been replaced by PISO-730U.
The ISO-730 has 32 of optically isolated digital I/O and 32 TTL logic I/O channels. Each of the 16 isolated digital input channels accept voltage from 5V to 24Vdc and have a resistance of 1.2KΩ. Every eight input channels use one external common ground. Channels 0-7 use EI.COM1 and channels 8-15 use EI-COM2. Each of the 16 isolated digital output channels equipped a darlington transistor. Every eight output channels use the common emitters. The power supply of the output port should use the external power. The channels 0-7 use EO-COM1 and channel 8-15 use EO-COM2. This interface board is easy installed in any PC/AT/XT compatible computer. The board interfaces to field logic signals, which eliminates ground loop problems and isolates the host computer from damaging voltages.
The ISO-730 has one 37-pin D-sub connector and four 20-pin headers. It is fully compatible to the PCL-730.
- 16-channels of optically isolated digital input
- 16-chanes of l optically isolated open-collector output
- 16-channels TTL level digital input (Non-isolation)
- 16-channels TTL level digital output (Non-isolation)
- DC/DC converter build-in
- One 37-pin D-sub connector and Two seperate 20-pin header for isolated I/O
- Two 20-pin header for TTL digital I/O (Non-isolatiton)
- 2500Vdc isolation voltage
- Interrupt handling
- Interrupt sources: channel 0 and channel 16
- Software:
- Toolkit for Windows 95/98
- Toolkit for Windows NT
- Toolkit for Windows 2000/XP
- Toolkit for Labview 95/98
- Toolkit for Labview NT
- Toolkit for Labview 2000/XP
- Toolkit for DasyLab
- Applications:
- Factory Automation
- Product Test
- Laboratory Automation
Specifications
- Isolated Input
- Channels : 16
- Type : Isolated Current input
- Isolation Voltage : 2500V
- Input Voltage : 5V to 30V
- Input impedance : 1.2K ohm
- Response time : 10Khz Max
- Isolated Open-collector Output
- Isolated Open-Collector Output
- Channels : 16
- Output voltage : Open-collector 5 to 40Vdc
- Isolation voltage: 2,500Vdc
- Sink current: 200mA (Max.)
- Response time : 10Khz max.
- Non-Isolated Digital I/O
- Digital Input
- Channels : 16
- Type : TTL Level
- Input Voltage : High : 2.0(min.) / Low :0.8 V(max.)
- Input Load : High : 50mA max. @2.7V / Low: 40mA max.@0.5V
- Response Time : 30Khz max.
- Digital Output
- Channels : 16
- Type: TTL Level
- High :
- Source 0.4mA at 2.4V min
- Low : sink 8 mA at 0.5V max
- Interrupt Source
- Isolated Digital input channel 0 and 1
- Non- isolated digital input channel 0 and 1
- Environmental
- Operation Temperature. 0°C to 50°C
- Storage Temperature: -20°C to 70°C
- Humidity: 0-90%, non-condensing
- Dimensions: 172mm x 124mm
References and Support
Customer Reviews (0)
Be the first to leave a review.
Product Added to Cart
...
$0.00 Each
Quantity added: