I-7590
1 Channel, RS-232/RS-422 RS-485 to M-Bus Converter. Support 100 M-Bus slaves. Configurablee M-Bus baud rate from 300 bps to 115200 bps. Watchdog Inside. DIN Rail mountable. Has operating temperature range of -25°C ~ +75°C (-13°F ~ +167°F).
References & Support
Features
Geared for M-Bus slave devices, the I-7590 is most useful as a serial bus to M-Bus convertor. It offers conversion from three communication types (RS-232, RS-422, and RS-485) to M-Bus. Two rotary switches allows for quick mode change from serial port baud to M-Bus port baud.
Application
- Serial Baud and M-Bus Baud can be configured separately
- Provides 10 kinds of Baud for default, 6 kinds of Baud for user-defined
- Supports up to 100 M-Bus slaves
- Provides transparent communication
- Watchdog inside
- Bias resistors of RS-422 and RS-485 adjust by switch
- Allows updating firmware by the RS-232 port
- Overcurrent and short-circuit protection on the M-Bus port
- 3750 Vrms photocouple isolation on the M-Bus port
- ±4 kV ESD to contact
- Reverse polarity protection on power
- Provide 3 LED indicators, PWR LED, MTX LED and MRX LED
- Dimensions: 72mm x 122mm x 33mm (W x L x H)
Specifications
M-Bus Interface | |||
Channel Number | 1 | ||
Baud Rate (bps) | Adjustable M-Bus bus baud rate from 300 bps to 115200 bps or configurable user-defined rate | ||
Data Bit | 5, 6, 7, 8 | ||
Stop Bit | 1, 2 | ||
Parity | None, Even, Odd, Space, Mark | ||
Isolation | 3750 Vrms for photo-couple | ||
ESD Protection | Contact ±4 kv class B | ||
Current Protection | Short-Circuit Protection | ||
UART Interface | |||
Channel Number | 1, RS-232 / RS-422 / RS-485 (can't be used simultaneously) | ||
Baud Rate (bps) | Adjustable M-Bus bus baud rate from 300 bps to 115200 bps or configurable user-defined baud rate | ||
Data Bit | 5, 6, 7, 8 | ||
Stop Bit | 1, 2 | ||
Parity | None, Even, Odd, Space, Mark | ||
ESD Protection | Contact ±4 kv class B | ||
Bias Resistor | Adjustable by switch for RS-422 and RS-485 | ||
Power | |||
Power Supply | Unregulated +10 ~ +30 VDC | ||
Protection | Power reverse polarity protection, Over-voltage protection | ||
Power Consumption | 1.8 W @ 24 VDC (with 1 slave device), 11.8 W @ 24 VDC (with 100 slave devices) | ||
Mechanism | |||
Installation | DIN-Rail | ||
Dimensions | 72mm x 122mm x 33mm (W x L x H) | ||
Environment | |||
Operating Temperature | -25°C ~ +75°C (-13°F ~ +167°F) | ||
Storage Temperature | -30°C ~ +80°C (-22°F ~ +176°C) | ||
Ambient Relative Humidity | 10% ~ 90% RH, non-condensing |