DeviceNet Slave Module of 8-Channel PWM and 8-Channel High Speed 32-bit Counter and Digital Input, Supports Operating Temperatures From -25°C ~ +75°C (-13°F ~ +167°F)

CAN-2088D

DeviceNet Slave Module of 8-Channel PWM and 8-Channel High Speed 32-bit Counter and Digital Input, Supports Operating Temperatures From -25°C ~ +75°C (-13°F ~ +167°F)

  Price:  $299.00  

Features

CAN-2088D applicationPWM (Pulse width modulation) is a powerful technique for controlling analog circuits. It uses digital outputs to generate a waveform with variant duty cycle and frequency to control analog circuits. CAN-2088D is a PWM slave module of DeviceNet protocol. It has 8 PWM output channels and 8 high speed counter channels. It can be used to develop powerful and cost effective analog control system.

Applications

  • Controlling the position/speed of motors
  • Dimming the brightness of lamps
  • Controlling the speed of fans
  • High speed counter

Specifications

DeviceNet Interface
DeviceNet Specification
Volume I, Release 2.0 & Volume II, Release 2.0, Errata5
DeviceNet subscribe
Group 2 Only Server
Connection supported
1 connection for Explicit Messaging
1 connection for Polled I/O
1 connection for Bit-Strobe I/O
Baud Rate
 Setting by Rotary Switch
125 kbps, 250 kbps, 500 kbps
Node ID 
 Setting by Rotary Switch
0 ~ 63
Heartbeat message
Yes
Shutdown message
Yes
Terminator Resistor
Switch for 120 Ω terminator resistor
Connector
5-pin screwed terminal block 
(CAN_GND, CAN_L, CAN_SHLD, CAN_H, CAN_V+)
EDS file
Yes
LED
PWR/NET/MOD
PWM
Channels
8 (Source)
Frequency
0.2 ~ 500 kHz (non-continuous)
Scaling Resolution
16-bit (1 ~ 128 μs for each step)
Duty Cycle
0.1 ~ 99.9 %
PWM Mode
Burst mode, Continuous mode
Burst mode counter
1~65535 counts
Trigger Mode
Hardware (Start and Stop) or Software (Start and Stop)
Intra-module Isolation
3750 Vrms
ESD Protection
4 kV Contact for each channel
Digital Input
Channels
8 (Sink/Source)
ON Voltage Level
+5.5 ~ +30 V
OFF Voltage Level
<3.5 V
Counter Frequency
500 kHz max.
Max. Counts
32-bits (4,294,967,295)
Input Impedance
4.7 kΩ, 1/4 W
Intra-module Isolation
3750 Vrms
ESD Protection
4 kV Contact for each channel
LED
DeviceNet Status
3 LEDs for PWR/NET/MOD
Terminal Resister
1 LED as Terminal Resister indicators
PWM LED
8 LEDs as PWM Output indicators
DI LED
8 LEDs as Digital Input indicators
Power
Power Supply
Unregulated +10 ~ +30 VDC
Power Consumption
2 W
Mechanism
Installation
DIN-Rail
Dimensions
32.3 mm x 99 mm x 77.5 mm ( W x L x H )
Environment
Operating Temp.
-25 ~ +75 ℃
Storage Temp.
-30 ~ +80 ℃
Humidity
10 ~ 90% RH, non-condensing

Related Products


ICP DAS USA,Inc.