> Data Acquisition > Remote I/O Data Acquisition > PROFIBUS Data Acquisition > PROFI-5060

PROFIBUS Remote I/O Module with 8 Isolated Digital Inputs and 4 Digital Outputs

PROFI-5060

write a review write a review

PROFIBUS Remote I/O Module with 8 Isolated Digital Inputs and 4 Digital Outputs

Price: $459.00

Fastest Delivery:

Qty:

Compare

Compare: 0

ADD TO CART

BUY BY 1-CLICK

Email Product Details Write a Review Write a Review Email Us

References and Support Add to Quote

References & Support

ROHS

Features

The PROFI-5060 is specially designed for the slave device of PROFIBUS DP protocol. It supports up to 8-channel isolated digital input and 4-channel relay output. Users can easily to choose and configure it by using the GSD file in any PROFIBUS Configurator.

The PROFI-5060 is one of the PROFIBUS DP series products produced by ICP DAS. It provides the PROFIBUS DP communication protocol with any DP-Masters. The PROFI-5060 provides ±4KV ESD protection contacting for all terminals (include I/O Terminals and PROFIBUS connector). By applying the PROFI-5060, users can easily establish a PROFIBUS DP network with other DP-Masters. In advance, it can be used in the application of building automation, remote data acquisition, environment control and monitoring, laboratory equipment & research, factory automation, etc..

Support for PROFIBUS DP-V0 protocol
Detect transmission rate automatically(Max. 12Mbps)
Address 0~99 set by rotary switches
Network Isolation Protection
3000VDC isolation protection on PROFIBUS side
4KV ESD Protection (contact for any terminal)
Wide range of power input (DC 10~40 VDC) and operating temperature (-25°C~+75°C)

profi-5060

Applications

Industrial Automation
Factory Automation
Process Automation
Etc…

Applications

Features

Protocol & Hierarchy	DP-V0 Slave
Supports Transmission Rate (kbps)	9.6, 19.2, 45.45, 93.75, 187.5, 500, 1500, 3000, 6000, 12000
Transmission Rate Setting	detected automatically
Address Setting	0~99 set by rotary switches
Indicators	PWR and RUN LEDs
I/O modules Configuration	Configured by GSD file
Network Isolation Protection	High Speed iCoupler
DC Isolation Protection	3000 VDC on PROFIBUS side
4KV ESD Protection	Contact for each terminal

Specifications

Hardware
ESD Protection	4 kV class A
PROFIBUS Interface
Controller	Profichip VPCLS2
Transceiver	ADI ADM2486
Connector	9-pin female D-Sub
Baud Rate (bps)	9.6 k, 19.2 k, 45.45 k, 93.75 k, 187.5 k, 500 k, 1.5 M, 3 M, 6 M, 12 M
Transmission Distance (m)	Depend on baud rate (for example, max. 1200 m at 9.6 kbps )
Isolation	3000 VDC for DC-to-DC, 2500 Vrms for bus-to-logic
Protocol	DP-V0
LED
Round LED	PWR LED, RUN LED
Power
Power supply	Unregulated +10 ~ +40 VDC
Protection	Reverse polarity protection, Over-voltage brown-out protection
Power Consumption	1 W
I/O
Digital Output	4 Channels (Form C ) Contact Rating: 0.6A@125VAC, 2A@30VDC Operating Time: 3ms. Release Time: 2ms. (Typical) Minimum Life: 500,000 Ops.
Digital Input	8 Channels (Sink or Source), Isolated from each other Off Voltage Level: +1V Max. On Voltage Level: +4 ~ +30V Input Impedance: 3KΩ in series with opto-coupler Isolation Voltage: 3750Vrms
Mechanism
Installation	DIN-Rail
Dimensions	91 mm x 128 mm x 52 mm (W x L x H)
Environment
Operating Temp.	-25°C ~ 75°C (-13°F ~ +167°F)
Storage Temp.	-30°C ~ +85°C (-22°F ~ +185°F)
Humidity	5 ~ 95% RH, non-condensing