8 Dry/Wet contact Digital Input Channels and 8 source-type Digital Output PoE Module, web browser configurable, allows users to implement IF-Then Else If type control logic and communicable over Modbus TCP. Operating temperatures of -25°C to +75°C.

WISE-7555M

8 Dry/Wet contact Digital Input Channels and 8 source-type Digital Output PoE Module, web browser configurable, allows users to implement IF-Then Else If type control logic and communicable over Modbus TCP. Operating temperatures of -25°C to +75°C.

  Price:  $529.00  

Features

Developed by ICP DAS, WISE (Web Inside, Smart Engine), is a user-friendly yet powerful controller for remote logic control and monitoring in various industrial applications. WISE-7555M is designed with a web site interface allowing users to implement IF-THEN-ELSE control logic on controller with no programming required.

With the integration of the IF-THEN-ELSE rule engine, WISE-7555M provides powerful functions such as I/O Monitoring/Control, Counter, Timer, Schedule, E-mail sending & CGI Command sending for numerous industrial applications. WISE-7555M also supports Modbus TCP and MQTT protocols to make seamless integration with SCADA, IT and IoT (Internet of Things) system.

WISE-7555M is equipped with 8 Dry/wet contact digital input channels and 8 source-type digital output channels. It features optical isolation for 2500 VDC of transient overvoltage protection but doesn’t provide channel-to-channel isolation. It can safely be used in applications where hazardous voltages are present. WISE-7555M follows IEEE 802.3af- compliant Power over Ethernet (PoE) specification. It allows receiving power from PoE enabled network by Ethernet pairs. In additional to this, WISE-7555M also has a built-in two-port Ethernet switch to implement daisy-chain topology. The cabling is much easier and total costs of cable and switch are significantly reduced.

  • Runs on browsers, no extra software tool is required.
  • No more programming, Web pages provided for control logic editing.
  • IF-THEN-ELSE logic rules execution ability.
  • Built-in I/O(DI: 8 Channels; DO: 8 Channels)
  • Support I/O Monitoring/Control, Counter, Timer, Email sending and CGI Command sending operations.

  • Modbus TCP Protocol for SCADA System Integration.
  • IEEE 802.3af-compliant Power over Ethernet (PoE).
  • 2-port Ethernet Switch for Daisy-Chain Topology.
  • Support Schedule operation
  • MQTT Protocol for IT & IoT(Internet of Things) System Integration.

Specifications

Hardware Specifications

Display

Channels

8

Contact

Dry +Wet

Sink/Source (NPN/PNP)

Dry: Source
Wet: Sink/Source

Wet Contact

On Voltage Level

+10 VDC to +50 VDC

Off Voltage Level

+4 VDC Max.

Dry Contact

On Voltage Level

Close to GND

Off Voltage Level

Open

Input Impedance

10 kΩ

Counters

Max. Counts

16-bit (65535)

Max. Input Frequency

50 Hz

Min. Pulse Width

10 ms

Overvoltage Protection

+70 VDC

Effective Distance

500 M Max.

Digital Output

Channels

8

Type

Isolated Open Collector

Sink/Source (NPN/PNP)

Source

Max. Load Current

650 mA/channel at 25°C

Load Voltage

+10 VDC to +40 VDC

Overvoltage Protection

47 VDC

Overload Protection

-

Short-circuit Protection

Yes

Communication

Ethernet Port

2 x RJ-45, 10/100 Base-TX, Swtich Ports

PoE

Yes

Protocol

Modbus TCP, MQTT

LED Indicators

for System Running

Yes

for Ethernet Link/Act

Yes

for I/O Channel Status

Yes

for PoE Power

Yes

LED Indicators

I/O

2500 VDC

EMS Protection

ESD (IEC 61000-4-2)

±4 kV Contact for Each Terminal and ±8 kV Air for Random Point

EFT (IEC 61000-4-4)

±2 kV for Power Line

Surge (IEC 61000-4-5)

±2 kV for Power Line

Power

Reverse Polarity Protection

Yes

Powered from Terminal Block

12 to 48 VDC

Powered from PoE

Yes, IEEE 802.3af, Class1

Consumption

3.7 W (Max.)

Mechanical

Dimensions (L x W x H)

120mm x 97mm x 42mm

Installation

Wall mounting

Environment

Operating Temperature

-25°C to +75°C

Storage Temperature

-30°C to +80°C

Humidity

10 to 90% RH, non-condensing


Software Specifications

Functions

Rule Configuration Website

Access Web server on WISE controllers to edit and upload logic rules through web browser.

72 IF-THEN-ELSE Logic Rules

3 IF conditions with AND or OR operators
3 THEN actions and 3 ELSE actions

48 Internal Registers

Hold temporary variables and read/write data

24 Timers

Delay / Timing functions.

24 Schedules

Setup prescheduled routine tasks.

24 Emails

Send Email messages to pre-set Email receivers.

24 CGI Commands

Send pre-set CGI commands.

24 Recipes

Set up THEN/ELSE action groups.

8 P2P remote modules

Set up the connection information for the remote WISE modules.

Modbus TCP Protocol

Real time control and monitoring I/O channels and system status of controllers via SCADA software.

MQTT Protocol

Real time message publish/subscribe mechanism for I/O channels and system status via IT/IoT software.

IF Conditions

DI Channel

ON, OFF, ON to OFF, OFF to ON, Change

Internal Register

=, >, <, >=, <= (value)

DI Counter
DO Counter

=, >, <, >=, <= (value), Change

Timer

Timeout, Not Timeout

Schedule

In Range, Out of Range

P2P

DI, AI, DI counter, DO counter, IR

Rule Status

Enable, Disable

THEN / ELSE Actions

DO Channel

ON, OFF, Pulse Output

Internal Register

Change the value

DI Counter
DO Counter

Reset

Timer

Start, Reset

Schedule

Enable, Disable

Email
MQTT message
CGI Commands

Send

Recipe

Execute

P2P

DO(On/Off), AO, IR

Rule Status

Enable, Disable

Customers who bought this item also purchased the following items.


Related Products