8-channel Analog Input (Current Input) with High Voltage Protection and 4-channel Isolated Digital Output Output PoE Module, web browser configurable, allows users to implement IF-Then Else If type control logic and communicable over Modbus TCP. MiniOS7 Operating System.

WISE-7117

8-channel Analog Input (Current Input) with High Voltage Protection and 4-channel Isolated Digital Output Output PoE Module, web browser configurable, allows users to implement IF-Then Else If type control logic and communicable over Modbus TCP. MiniOS7 Operating System.

  Price:  $419.00  

Features

Introduction

WISE (Web Inside, Smart Engine) is a product series developed by ICP DAS that functions as control units for use in remote logic control and monitoring in various industrial applications. WISE offers a user-friendly and intuitive web site interface that allows users to implement IF-THEN-ELSE control logic on controllers just a few clicks away; no programming is required. With its powerful and easy-to-use features, it will minimize the learning curve, shorten time to market and dramatically reduce the effort and cost spent on system development.

WISE-7117 follows IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) specification. It allows receiving power from PoE enabled network by Ethernet pairs (Category 5 Ethernet cable). This feature provides greater flexibility and higher efficiency therefore simplifying systems design, saving space, reducing cables and eliminating the requirement for dedicated electrical outlets. Meanwhile, in case under a non-PoE environment, WISE-7117 will still be able to receive power from auxiliary power sources like AC adapters or battery, etc.

This multi-function module WISE-7117 supports Modbus/TCP protocol to make seamless integration with SCADA software available. It features 16-bit, 8-channel differential analog inputs and 4-channel digital ouputs. Each analog channel is allowed to configure an individual range and has 240Vrms high over voltage protection. Jumper selectable for voltage or current input.

Features

  • Built-in Web Server for IF-THEN-ELSE rule setting
  • Built-in IF-THEN-ELSE rule engine for logic operation
  • No more programming. Just click and get done!
  • Support IO, Counter, Timer, Email operations
  • Modbus/TCP Protocol for SCADA Software Seamless Integration
  • IEEE 802.3af-compliant Power over Ethernet (PoE)
  • 10/100 Base-TX Ethernet
  • AI Type: 8 Differential (mV, V, mA)
  • DO Type: 4 Open Collector Outputs
  • Over Voltage Protection is up to 240 Vrms
  • 2-way Isolation/ESD protection

Applications

Building Automation, Factory Automation, Machine Automation, Remote Maintenance, Remote diagnosis and Testing Equipment, etc.

Specifications

Analog Input
Input Channels 8 (Differential)
Input Type +/-150 mV, +/-500 mV, +/-1V, +/-5V, +/-10V
+/-20 mA, 0 ~ 20 mA, 4 ~ 20 mA (Jumper Selectable)
Resolution Normal Mode 16-bit
Fast Mode 12-bit
Sampling Rate Normal Mode 10 Samples/Sec.(Total)
Fast Mode 60 Samples/Sec. (Total)
Accuracy Normal Mode +/-0.1%
Fast Mode +/-0.5% or better
Bandwidth Normal Mode 15.7 Hz
Fast Mode 78.7 Hz
Zero Drift +/-10 μV/°C
Span Drift +/-25 ppm/°C
Input Impedance Voltage 2 MΩ
Current 125 Ω
Common Mode Rejection 86 dB Min.
Normal Mode Rejection 100 dB
Individual Channel Configuration Yes
Over Voltage Protection 240 Vrms
ESD Protection +/-4 kV (Contact for each channel)
+/-8 kV air for random point
EFT Protection +/-4 kV for Power
Digital Output
Output Channels 4 (Sink)
Output Type Isolated Open Collector
Max. Load Current 700 mA/Channel
Load Voltage 5 VDC ~ 50 VDC
System
CPU 80186 CPU (80 MHz)
SRAM 512 KB
Flash Memory 512 KB
EEPROM 16 KB
Dual Watchdog Yes
Communication
PoE Ethernet Port 10/100 Base-TX (With Link, Activity LED
Indicator) and automatic MDI/MDI-X
2-way Isolation
Ethernet 1500 VDC
AI and DO 2500 Vrms
LED Indicators
PoE PoE On
L1 Run
L2 Link/Act
L3 10/100 M
Power Requirements
IEEE 802.3af Class 1
Required Supply Voltage Powered by Power-Over-Ethernet (PoE) or auxiliary power +12 ~ +48 VDC(non-regulated)
LED Indicator Yes
Power Consumption 0.12 A @ 24 VDC Max.
Mechanical
Dimensions (W x H x D) 72 mm x 123 mm x 35 mm
Installation DIN-Rail or Wall mounting
Environment
Operating Temperature -25°C ~ +75 °C
Storage Temperature -30°C ~ +80 °C
Relative Humidity 5 ~ 90% RH, non-condensing

Software Specifications

Functions
36 IF-THEN-ELSE Logic Rules 3 IF conditions with AND or OR operators
3 THEN actions
3 ELSE actions
48 Internal Registers Hold temporary variables and read/write data via Modbus/TCP address.
12 Timers Delay / Timing functions.
12 Emails Send Email messages to pre-set Email receivers.
Rule Configuration Website Access Web server on WISE controllers to edit and upload logic rules through web browser.
Modbus/TCP Protocol Real time control and monitoring I/O channels and system status of controllers via SCADA software.
IF Conditions
AI Channel =、>、<、>=、<=(value)
Internal Register
DO Counter =、>、<、>=、<=(value)、Change
Timer Timeout、Not Timeout
THEN / ELSE Actions
DO Channel ON、OFF、Pulse Output
Internal Register Change the value
DO Counter Reset
Timer Start、Stop
Email Send

Related Products


ICP DAS USA,Inc.