Developed by ICP DAS, the WISE (Web Inside, Smart Engine) series functions as a control unit for use in remote logic control and monitoring in various industrial projects. With no programming required, WISE is user-friendly and allows users to implement IF-THEN-ELSE control logic on controllers just a few clicks away.With its powerful and easy-to-use features, it will minimize the learning curve, shorten time to market and dramatically reduce the labor and cost spent on system development.
WISE-5231M-3GWA provides more supports in I/O functions. It allows connections to XV-board; supports DCON I/O modules, Modbus RTU Slave modules and Modbus TCP Slave modules together. Its flexibility in I/O modules integrations offers a wide range of selection options and meets the requirements from various applications.
WISE-5231M-3GWA provides Data Logger function to record the I/O channel data by periodic cycle or event trigger while sending the data files by FTP to the control center. In addition to the CGI command sending function, WISE-5231M-3GWA now supports the CGI command receiving function that allows the devices (such as IP camera) connected to the network to trigger the operation of IF-THEN-ELSE logic rule of WISE-5231M-3GWA. The well thought-out CGI command functions make WISE-5231M-3GWA being able to interact with the devices ﬂexibly in the network environment.
WISE-5231M-3GWA also supports SNMP, SNMP Trap, MQTT and DDNS protocols and services. The ﬂexible integration ability with the SCADA and IT software or devices and the reliable ability of real-time I/O logic control and data logger make WISE-5231M-3GWA the most cost-effective I/O controller in the IoT (Internet of Things) Age.
- Runs on browsers, no extra software tool is required
- No more programming, Web pages provided for control logic editing
- IF-THEN-ELSE logic rules execution ability
- Support XV-board
- Support DCON or Modbus RTU Slave devices (Up to 32)
- Support Modbus TCP Slave devices (Up to 16)
- SSL/TLS Email sending function supported
- Timer and Schedule functions supported
- Data logger and data files send back function supported
- Active I/O sending function for real-time data transfer
- CGI Command sending and receiving function supported for IP Camera and Network device
- Support Modbus TCP/RTU, SNMP, FTP and MQTT protocols
- 3G Wireless data communication and SMS message sending/receiving
Building Automation, Factory Automation, Machine Automation, Remote Maintenance, Remote diagnosis and Testing Equipment, etc.
Reference & Support
32-bit ARM CPU
Built-in WISE Firmware
Built-in one 4 GB microSD card (support up to 32 GB microSDHC card)
RJ-45 x 1, 10/100/1000 Base-TX (Auto-negotiating, Auto MDI/MDI-X)
RS-232 (TxD, RxD, GND), non-isolated, Speed: 115200 bps max.
RS-485 (Data+, Data-), non-isolated, Speed: 115200 bps max.
RS-485 (Data+, Data-), 2500 VDC isolated, Speed: 115200 bps max.
Yes (Red, Green)
I/O Module Support
Local I/O Module
Yes, one XV-board
Remote I/O Module
DCON modules (up to 32) or Modbus RTU Slave modules (up to 32), Modbus TCP Slave modules (up to 16)
12 to 48 VDC
117 mm x 126 mm x 58 mm (W x L x H) / Wall Mounting Installation
Operating Temperature: -25 °C to +75 °C; Storage Temperature: -40 °C to +80 °C
10 to 90% RH, Non-condensing
GPRS class 12/10; GPRS station class B
Downlink transfer: Max. 85.6 kbps; Uplink transfer: Max 42.8k bps
WCDMA 850/900/1900/2100 MHz
WCDMA / HSPA+; Download: Max. 14.4Mbps; Upload: Max 5.76Mbps
User-friendly and intuitive web site interface
Runs on browsers, no extra software tool is required
No more programming, Web pages provided for control logic editing and system parameters setting
Various options for easy I/O module integration
Support DCON or Modbus RTU Slave devices (Up to 32)
Support Modbus TCP Slave devices (Up to 16)
Intelligent Logic operation and data logger ability at ﬁeld sites
IF-THEN-ELSE Logic operation
Provide IF-THEN-ELSE logic rule editing, and the ability for IF-THEN-ELSE logic rules execution
I/O channel monitoring and control
Offers various options for I/O channel settings; for example: deadband setting for AI signals, linear scale setting, temperature degree in Celsius or Fahrenheit setting, power on value setting for DO channel, pulse output setting and DI counter setting, etc
Perform the timing function. The status of Timer can be included in IF condition statements to trigger the THEN/ELSE actions
Perform the prescheduled routine tasks. The status of Schedule can be included in IF condition statements to trigger the THEN/ELSE actions. “Calendar” and “Weekly repeat” schedule setting UI are provided.
Execute Email message sending. The SSL/TLS authentication is provided
Perform CGI command sending and receiving functions. The content of CGI command receiving can be used in IF condition statements to trigger the THEN/ELSE actions
Perform Data Logger function to real-time record the I/O channel data of the controller by Period or Event Trigger operation
Work as a variable to hold the temporary value, and provide the basic mathematical operation.
Various protocols for seamless integration with SCADA/MIS/ MES/IT/ Network Management systems
Real-Time I/O channel data
Support Modbus TCP/RTU protocol for SCADA system
Support SNMP and MQTT protocols for the integration with MIS/MES/IT/Network Management systems
CGI Command sending and receiving function supported for the integration with IP Camera and Network devices.
Active I/O sending mechanism supported
Historical I/O channel data ﬁles
FTP Server/Client ability for the maintenance of data logger ﬁles and the data logger ﬁles automatically send back operation
Provide data recovery mechanism so that when experiences network disconnection, the data log ﬁles will be kept in WISE, and be recovered after the network is resumed
Provide alarm notiﬁcation mechanism so that when microSD card is amaged, the data log ﬁle will be stored in WISE to ensure zero data loss of the data logger
DDNS (Dynamic DNS) service supported
Support 3G Wireless data communication, and SMS message ending/receiving (WISE-5231M-3GWA only)