The tNS-200IN single port PoE Injector supports PoE powered devices in industrial environments. The tNS-200IN delivers both data and power over a single standard Ethernet cable to a PoE powered device designed to receive both data and power through its RJ-45 port connector.
- Auto-detection of PD (powered devices)
- Power Sourcing Equipment (PSE) operation
- Over-temperature, over-current and over/under-voltage detection
- Supplies up to 15.4 watts
- No user settings
- Tiny packaging fits on your DIN-Rail
- Cost-effective for tNS-200IN
|RJ45 ports||1 for Ethernet in, 1 for PoE out|
|LED Indicators||Power, Power Device is detected|
|Input Voltage for tNS-200IN||+46 ~ +53 VDC|
|Input Voltage for tNS-200IN-24V||+18 ~ +32 VDC|
|Power consumption for tNS-200IN||0.4 A@ 48 VDC with PD full loading|
|Power consumption for tNS-200IN-24V||0.9 A@ 24 VDC with PD full loading|
|Protection||Power reverse polarity protection|
|Frame Ground for EMS Protection||Yes|
|Connection||4-Pin Removable Terminal Block|
|PoE Compliance||100% IEEE 802.3af compliant|
|PoE Classification||PSE (Power Sourcing Equipment)|
|PoE Voltage||+46 ~ +48 VDC depending on power input|
|PoE Power||Up to 15.4 watts|
|PoE Operation||Automatic detection and power management|
|PoE Pin assignments||V+ (Pin 4,5), V- (Pin 7,8)|
|PoE disconnect mode||DC disconnect|
|Dimensions||52 mm x 86 mm x 27 mm (W x L x H)|
|Operating Temperature||-40 ~ +75 °C|
|Storage Temperature||-40 ~ +85 °C|
|Ambient Relative Humidity||10% ~ 90% RH, non-condensing|
7-channel RTD Input ...
6-channel Data Acqui...
8-channel Isolated S...
8-channel Voltage In...
Modbus TCP based Eth...
Unmanaged 8 Port Ind...
Unmanaged 5-Port Ind...
48V , 0.52A, 25 W Po...