32 Channel TTL-level Digital I/O, 16 Channel Optically Isolated Digital Input and 16 Open-Collector Digital Output Board (Current Sinking)

PISO-730A (current sinking)

32 Channel TTL-level Digital I/O, 16 Channel Optically Isolated Digital Input and 16 Open-Collector Digital Output Board (Current Sinking)

Features

***This Product has been phased out and replaced by PISO-730AU ***

The PISO-730A provides 32 channels isolated digital I/O (16 DI and 16 DO) and 32 channels TTL-level digital I/O (16 DI and 16 DO). Each digital output offers a PNP transistor and integral suppression diode for inductive load. The board interface to field logic signals, eliminating ground-loop problems and isolating the host PC from damaging voltages. Its isolated I/O channels provide up to 3750Vdc of protection.

The PISO-730A has one 37-pin D-type connector and two 20-pin flat-cable connectors. The flat-cable can be connected to ADP-20/PCI adapter. The adapter can be fixed on the chassis. It can be installed in a 5V PCI slot and can support truly "Plug and Play"

  • PCI Bus
  • 16 isolated DI/DO channels
  • 32 TTL-level DIO channels (16 x DI & 16 x DO)
  • DC/DC converter built-in
  • One DB-37 D-type connector for isolation input and output
  • Two separate 20-pin connectors for non-isolated input and output channels.
  • 3750Vdc isolation voltage
  • n Interrupt: 2 channels
  • 5V PCI board


Software

  • Toolkit for DOS
  • Toolkit for Windows 95/98
  • Toolkit for Windows NT
  • Toolkit for Windows 2000/XP
  • LabVIEW toolkit for Windows
  • Toolkit for OCX 95/98
  • Toolkit for OCX NT
  • Toolkit for OCX 2000/XP
  • Toolkit for LINUX
  • Toolkit for DasyLab


Applications

  • Factory automation
  • Product test
  • Laboratory automation

 

Specifications

Isolated Digital Input
  • 16 Optical-isolated inputs
  • Type : Isolated current input
  • Isolation Voltage : 3750Vdc
  • Input voltage : 3.5V to 30 Vdc
  • Input impedance : 1.2K/1W
  • Response time: 10KHz Max
  • 16 TTL-level inputs
  • Logic high voltage: 2.4V (Min.)
  • Logic low voltage: 0.8V (Max.)

Isolated Digital Output

  • 16 optical-isolated outputs
  • Output voltage: open-collector 10 to 30 Vdc
  • Isolation voltage : 3750Vdc
  • Source current: 100mA max.
  • Response time: 10KHz max.
  • 16 TTL-level Outputs
  • Sink current: 8 mA (Max.)
  • Source current: 0.4 mA (Max.)

Environmental

  • Operation Temperature: 0°C to 60°C
  • Storage Temperature: -20°C to 70°C
  • Humidity: 0 - 90%, non-condensing
  • Dimensions: 180mm x 105mm
  • Power consumption: 5V/600mA
ICP DAS USA,Inc.