32 Channel TTL-level Digital I/O, 16 Channel Optically Isolated Digital Input and 16 Open-Collector Digital Output Board (Current Sourcing). Includes CA-4002 D-Sub connector

PISO-730 (current sourcing)

32 Channel TTL-level Digital I/O, 16 Channel Optically Isolated Digital Input and 16 Open-Collector Digital Output Board (Current Sourcing). Includes CA-4002 D-Sub connector

Features

***This Product has been phased out and replaced by PISO-730AU ***

PISO-730 Sink SourceThe PISO-730A provides 32 channels isolated digital I/O (16 DI and 16 DO) and 32 channels TTL-level digital I/O (16 DI and 16 DO). Each digital output offers a PNP transistor and integral suppression diode for inductive load. The board interface to field logic signals, eliminating ground-loop problems and isolating the host PC from damaging voltages. Its isolated I/O channels provide up to 3750Vdc of protection.

The PISO-730A has one 37-pin D-type connector and two 20-pin flat-cable connectors. The flat-cable can be connected to ADP-20/PCI adapter. The adapter can be fixed on the chassis. It can be installed in a 5V PCI slot and can support truly "Plug and Play"

  • PCI Bus
  • 16 isolated DI/DO channels
  • 32 TTL-level DIO channels (16 x DI & 16 x DO)
  • DC/DC converter built-in
  • One DB-37 D-type connector for isolation input and output
  • Two separate 20-pin connectors for non-isolated input and output channels.
  • 3750Vdc isolation voltage
  • n Interrupt: 2 channels
  • 5V PCI board


Software

  • Toolkit for DOS
  • Toolkit for Windows 95/98
  • Toolkit for Windows NT
  • Toolkit for Windows 2000/XP
  • LabVIEW toolkit for Windows
  • Toolkit for OCX 95/98
  • Toolkit for OCX NT
  • Toolkit for OCX 2000/XP
  • Toolkit for LINUX
  • Toolkit for DasyLab


Applications

  • Factory automation
  • Product test
  • Laboratory automation

Specifications

Digital Input
Isolation Voltage 3750 Vrms
Channels Isolated 16
Non-Isolated 16
Compatibility Isolated Optical
Non-Isolated 5 V/TTL
Input Voltage Isolated Logic 0: 0~1 V
Logic 1: 9 ~ 24 V
(Logic 1: Min. 7 V; Max. 30 V)
Non-Isolated Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Input Impedance 1.2 KΩ, 1 W
Response Speed Isolated 4 kHz (Typical)
Non-Isolated 1.2 MHz (Typical)
Digital Output
Isolation Voltage 3750 Vrms
Channels Isolated 16
Non-Isolated 16
Compatibility Isolated Sink, Open Collector
Non-Isolated 5 V/TTL
Output Voltage Non-Isolated Logic 0: 0.4 V max.
Logic 1: 2.4 V min.
Output Capability Isolated 100 mA/+30 V for one channel @ 100% duty
Non-Isolated Sink: 2.4 mA @ 0.8 V
Source: 0.8 mA @ 2.0 V
Response Speed Isolated 4 kHz (Typical)
Non-Isolated 1.2 MHz (Typical)
General
Bus Type 5 V PCI, 32-bit, 33 MHz
Data Bus 8-bit
Card ID No
I/O Connector Female DB37 x 1
20-pin box header x 2
Dimensions (L x W x D) 180 mm x 105 mm x 22 mm
Power Consumption 640 mA @ +5 V
Operating Temperature 0 ~ 60 °C
Storage Temperature -20 ~ 70 °C
Humidity 5 ~ 85% RH, non-condensing

Related Products


ICP DAS USA,Inc.