Download Now

Enter your information or login to view the document.


×
11Mbps Wireless Networking Access Point with Transmission Range up to 300m (984 feet)

NWH650

11Mbps Wireless Networking Access Point with Transmission Range up to 300m (984 feet)

    Item Not Available  


No documentation or manuals for this item.

Features

*** This product has been phased out and replaced with NWH660 ***

The InstantWave 11Mbps Wireless Access Point is a cost-effective, easy-to-deploy wireless network solution for telecommuters or small offices and branch offices. A comprehensive SNMP-based management tool provides professional level local and remote management and monitoring. Featuring a well-designed dual antenna for robust operation in radio frequency hostile environments, and complying with the IEEE 802.11b and Wi-Fi standards, the InstantWave 11Mbps Wireless Access Point is a high performance, easily managed wireless-wired network product.

  • Industrial IEEE 802.11b Standard Compliant
    • Complies with the IEEE 802.11b DSSS (Direct Sequence Spread Spectrum) wireless standard and is fully compatible with other Wi-Fi certified products, ensuring full product interoperability between vendors.
  • Superior Coverage and High Transmission Quality
    • With InstantWave's superior receive sensitivity and transmission power, the 11Mbps Wireless Access Point gives outstanding transmission quality over a range from 30%~50% more than similar products under the same environment conditions.
  • Easy Installation
    • User-friendly Windows-based interface, setup wizard, and step-by-step instructions make the InstantWave 11Mbps Wireless Access Point fast and easy to install.
  • Comprehensive Network Management Tools
    • Supports SNMP for MIB I and MIB II over Ethernet in a Windows environment.
  • Two Configuration Interfaces
    • Remote: Windows-based AP configuration using APMS (Access Point Management System)
    • Local: Allows a PC to configure the Access Point via a COM port (RS-232)
  • Protocol Filtering:
    • Prevents the AP from transmitting specified protocols from the wired Ethernet LAN into the wireless zone.
  • Remote Firmware Upgrade:
    • Updated AP firmware can be installed via the APMS program from a remote station.
  • Security
    • WEP (Wired Equivalent Privacy): 40 & 128-bit WEP encryption for secure wireless LAN data transmissions.
    • Domain Access Control (SSID): A security system that prevents unauthorized access to the wireless network.
    • MAC Access Control: Restricts wireless access to authorized MAC addresses only.
    • Administrative Access Control: Assigns AP administrators a password and management rights.
  • Easy and fast network
    • Combined with IEEE 802.11b Wi-Fi compliant wireless adapters, the InstantWave 11Mbps Access Point provides a total wireless networking/network expansion solution.

Specifications

NWH650
Standards Compliance IEEE 802.11b, Wi-Fi compliant
Radio Frequency Type Direct Sequence Spread Spectrum (DSSS)
Frequency Band 2.4GHz
Transmission Power 100mW (Max.)
Transmission Rate 11Mbps (Max.) 11/5.5/2/1Mbps auto fallback
Transmission Range Up to 300m (984ft) outdoors (depends on the interference conditions and environment) Up to 100m (328ft) indoors (depends on the interference conditions and environment)
Access Point Interfaces 10Base-T: RJ-45

RS-232: D-SUB 9 pin
Antenna Type Dual dipole diversity
Security Systems SSID; 40-bit/128-bit WEP encryption; MAC Access Control; SNMP authentication for authorized access
Software Support SNMP for MIB I and MIB II; 40-bit/128-bit WEP encryption; Dynamic rate shifting from 11/5.5/2/1Mbps; Network Configuration profile; Access Control; Protocol Filtering; Trap Management; Self-Diagnostic Test; Upgradeable Firmware
Operating Environment Operating Temperature: 0°C-55°C(32°F-131°F) Storage Temperature: -30°C-70°C (-22°F-158°F) Maximum Humidity: 85% at 40°C non-condensing
Dimensions 138mm x 114mm x 37mm (5.43 x 4.49 x 1.46in.) 
Power DC 5.1 Volt + 5%; 2A (Max.); AC adapter AC 100V ~ 240V; 1.0A (Typical)
Regulatory Approval FCC Part 15 B (US); CE
OS Support Windows 95/98/Me/NT4.0/2000/XP
System Requirements One IEEE 802.11b compliant wireless adapter; An Ethernet drop (UTP) One PC and a supplied RS-232 cable (only used when configuration of the AP is required)
Warranty One year limited

References and Support

No documentation or manuals for this item.

Customer Reviews (0)

Be the first to leave a review.

Recently Viewed Items

×

Write a Review

Name


E-mail


Phone


Rating: out of 5 Stars
Review (max 1000 characters)

characters left