NWH6110
11 Mbps Wireless Building to Building Bridge. Supports operating temperatures from 0°C ~ 55°C
Features
*** Product has been phased out and replaced by NWH660 ***
The InstantWave 11Mbps Wireless Access Point provides interoperability, expandability, security, and manageability for top performance wireless networking in both single and multiple AP installations. Comprehensive SNMP-based management software gives professional level network management tools for easy wireless network management and monitoring.
The InstantWave 11Mbps Wireless Access Point fully complies with the IEEE 802.11b and Wi-Fi standards. With superior wireless technology and advanced features, the InstantWave 11Mbps Wireless Access Point is a reliable, high performance, cost effective wireless solution.
- Industrial IEEE 802.11b Standard Compliant
- Complies with the IEEE 802.11b DSSS (Direct Sequence Spread Spectrum) wireless standard and is fully compatible with Wi-Fi certified products, ensuring full product interoperability between vendors.
- Superior Coverage and High Transmission Quality
- InstantWave's advanced radio frequency technology gives outstanding performance at up to 11Mbps data transmission/reception speed:
- Advanced external dual diversity antenna for top quality transmission/reception
- Superior receiving sensitivity enhances weak data signal pickup at longer distances
- Easy Installation
- User-friendly Windows-based interface, setup wizard, and step-by-step instructions make the InstantWave 11Mbps Wireless Access Point fast and easy to install.
- Detachable Antenna
- The detachable antenna design provides the flexibility to connect a high-gain antenna for higher transmission quality over a wider coverage area, or in a radio frequency hostile environment.
- Wireless Configuration
- InstantWave's superior wireless technology eliminates the requirement to make a wired set up or configuration connection. Simply do it all from a wireless client!
- Comprehensive Network Management Tools
- Supports SNMP for MIB I and MIB II over Ethernet in a Windows environment.
- Service Discovery:
Auto IP Address Assignment Support: The NWH660 will automatically generate a new IP address should the DHCP server fail. - AP Discovery: Allows network administrators to easily locate all InstantWave APs for centralized management. - Supports Site Survey:
Helps evaluate and determine the best location in which to place the AP for the best performance. - Protocol Filtering:
Saves bandwidth and increases security by preventing the AP from transmitting unneeded protocols onto the wireless network. - On-line Firmware Upgradeability:
Allows AP firmware to be upgraded from a remote station without stopping the network. - Trap Server:
With auto-notification of abnormal operation, network administrators can easily monitor the network operating condition and take preventive action in order to increase network uptime. - Windows-based Configuration:
Allows users to easily configure the AP in a Windows environment. - DHCP Client Support:
Automatically obtains a new IP address from a DHCP server using the Dynamic Host Configuration Protocol. - Batch Configuration:
Automatically propagates configuration settings to a group of APs on the same subnet.
Specifications
- Standards Compliance:
- IEEE 802.11b, Wi-Fi compliant
- Radio Frequency Type:
- Direct Sequence Spread Spectrum (DSSS)
- Frequency Band:
- 2.4GHz
- Transmission Rate:
- Up to 300m (984ft) outdoors (depends on the interference conditions and environment)
- Up to 100m (328ft) indoors (depends on the interference conditions and environment)
- Access Point Interfaces:
- 10Base-T: RJ-45
- RS-232: D-SUB 9 pin
- Radio Wave: Antenna - Reverse-SMA
- Antenna Type:
- Dual dipole diversity
- Security:
- 40-bit/128-bit WEP encryption
- Secure SSID
- User Authentication (EAP-like)
- MAC Access Control
- Administrative Access Control
- Unauthorized wireless Access Alert
- Software Support:
- SNMP for MIB I and MIB II
- Windows-based network management tools
- Access Control; Protocol filtering
- Trap Management
- Self-Diagnostic Test
- Upgradeable Firmware
- Auto IP Assignment
- AP Discovery
- Seamless Roaming
- DHCP Client- Batch Configuration
- Operating Environment:
- Operating Temperature: 0°C ~ 55°C
- Storage Temperature: -30°C ~ 70°C
- Humidity: Maximum 85% non-condensing
- Dimensions:
- 220mm x 145mm x 33mm
- 8.66in x 5.71in x 1.30in
- Power:
- DC 5.1 Volt + 5%; 2A (Max.)
- AC adapter AC 100V ~ 240V; 1.0A (Typical)
- Power Consumption: 5.1Volt. 1.0A (Typical)
- Regulatory Approval:
- FCC Part 15 B (US)
- CE
- TELEC
- OS Supported: Windows 95/98/Me/NT4.0/2000/XP
- Warranty: One year limited