NS-200AFT
Industrial 10/100 Base-T to 100 Base-FX(SC/ST connectors, multi mode) Media Converter. Supports operating temperatures from -30 to 75°C. Replacement for NS-200FT
Features
This item has been phased out and replaced with the NS-200AFT-T
The NS-200AF series is an Ethernet (10/100Base-TX) to Fiber Optic (100Base-FX) converter. The Ethernet supports 10/100M auto-negotiation feature and auto MDI/MDI-X function.
The NS-200AF series is available in models that support an operating temperature of 0 to 70 °C, and an extended operating temperature of -30 to 75 °C
Features
- Automatic MDI / MDI-X crossover for plug-and-play
- Each port supports both 10/100 Mbps speed auto negotiation
- Store-and-forward architecture
- Full duplex IEEE 802.3x
- Supports +12 ~ +48 VDC voltage
- Supports operating temperatures range 0 °C ~ +70 °C
-30 to 75°C operating temperature range (T models) - DIN rail mount for industrial usage
Specifications
Technology | |
Standards | IEEE802.3, 802.3u, 802.3x |
Processing Type | Store & forward; wire speed switching |
MAC Addresses | 1024 |
Memory Bandwidth | 1.4 Gbps |
Interface | |
RJ45 port | 10/100BaseT(X) auto negotiation speed, Full duplex mode, and auto MDI/MDI-X connection |
Fiber port | 100 Base-FX (SC/ST connectors) |
LED Indicators | 10/100M, Link/Act, Full duplex(Fiber Port) |
Ethernet Isolation | 1500 Vrms 1 minute |
Frame Ground for EMS Protection | Yes |
Multi Mode (NS-200AFT, NS-200AFT-T, NS-200AFC, NS-200AFC-T ) |
Multi mode fiber cables:50/125, 62.5/125 or 100/140 μm |
Distance :2 km, (62.5/125 μ mrecommended) for full duplex | |
Wavelength : 1300 or 1310nm | |
Min. TX Output:- 20 dBm | |
Max. TX Output: -14 dBm | |
RX Sensitivity: -34 to -31 dBm | |
Single Mode (NS-200AFCS, NS-200AFCS-T, NS-200AFCS-40T) |
Single-mode fiber cables: 8.3/125, 8.7/125, 9/125 or 10/125μm |
Distance: 15 km, (9/125 μm recommended) for full duplex | |
Wavelength: 1300 or 1310nm | |
Min. TX Output: - 15 dBm | |
Max. TX Output: -8 dBm | |
RX Sensitivity: -36 to -31 dBm | |
Ethernet Transmission distance | Ethernet : 2-pair UTP/STP Cat.3,4,5, EIA/TIA-568 100-ohm |
Fast Ethernet : 2-pair UTP/STP Cat. 5, EIA/TIA-568 100-ohm | |
Power | |
Input Voltage Range | +10 ~ +48 VDC (Non-isolation) |
Power consumption | 0.12 A @ 24 VDC, +/- 5% arrowed with 100M Full duplex |
LED Indicator | Yes |
Protection | Power reverse polarity protection |
Frame Ground for EMS Protection | Yes |
Mechanical | |
Case | Plastic (Flammability UL 94V-0) |
Dimensions (W x H x D) | 33mm x 107mm x 85mm |
Installation | DIN rail mount |
Environmental | |
Operating Temperature | 0°C ~ +70°C(-30°C ~ +75°C with T models) |
Storage Temperature | -30 ~ +85°C |
Ambient Relative Humidity | 10% ~ 90% RH, non-condensing |