Features
The M-7064D module is equipped with 8 LED indicators allowing the user to cleary monitor the status of the relay output. The M-7064D provides options that allow power-on and safe Relay Output values to be configured. 8 kV ESD, 4 kV EFT and 3 kV surge protection are also provided to enhance noise protection capabilities in industrial environments, making the M-7064D an ideal solution for small signal switching applications.
- 8 Form A Signal Relay Output Channels
- Dual Watchdog
- 8 kV ESD Protection
- ±4 kV EFT Protection
- ±3 kV Surge Protection
- Configurable Power-on Value Settings
- Configurable Safe Value Settings
- Wide Operating Temperature Range: -25 to +75°C
Applications
- Building Automation
- Factory Automation
- Machine Automation
- Remote Maintenance
- Remote Diagnosis
- Testing Equipment
Specifications
System Specifications
Communication
Interface
RS-485
RS-485 Bias Resistor
No (Usually supplied by the RS-485 Master. Alternatively, add a tM-SG4 or SG-785.)
Format
(N, 8, 1), (N, 8, 2), (E, 8, 1), (O, 8, 1)
Baud Rate
1200 to 115200 bps
Protocol
Modbus RTU, DCON
Dual Watchdog
Yes, Module (1.6 Seconds), Communication (Programmable)
LED Indicator/Display
System LED Indicator
Yes, 1 as Power/Communication Indicator
I/O LED Indicator
Yes, 8 LEDs as Relay Output Indicators
7-Segment LED Display
-
Isolation
Intra-Module Isolation, Field-to-Logic
2000 VDC
EMS Protection
ESD (IEC 61000-4-2)
±8 kV Contact for each Terminal
±16 kV Air for Random Point
Surge (IEC 61000-4-5)
±3 kV for Power
Power
Reverse Polarity Protection
Yes
Input Range
+10 ~ +30 VDC
Consumption
1.6 W (Max.)
Mechanical
Dimensions (L x W x H)
123 mm x 72 mm x 35 mm
Installation
DIN-Rail or Wall Mounting
Environment
Operating Temperature
-25 to +75°C
Storage Temperature
-40 to +85°C
Humidity
10 to 95% RH, Non-condensing
I/O Specifications
Relay Output
Channels
8 x Form A
Relay Typ
Signal Relay
Form A
Contact Rating
2 A @ 30 VDC
0.24 A @ 220 VDC
0.25 A @ 250 VAC
Min. Contact Load
10 mA @ 20 mV
Contact Material
Silver Nickel, Gold-covered
Operate Time
3 ms (typical)
Release Time
4 ms (typical)
Mechanical Endurance
108 ops
Electrical Endurance
2 x 105 ops
Surge Strength
2000 VDC
Power-on Value
Yes
Safe Value
Yes