M-7041
14 Channel Isolated Digital Input (Counter) Data Acquisition Module, communicable over Modbus RTU and RS-485, supports operating temperatures from -25 ~ 75°C
Features
The M-7000 series is a family of network data acquisition and control modules that support Modbus RTU. They can be remotely controlled using a set of commands called DCON protocol. With the Modbus RTU protocol, it can easily communicate with most popular SCADA/ HMI software and PLCs.
- Digital Input Channels: 14
- Display LED:
- 4 1/2 digit LED display ( MI-7016D)
- Digital input status
- Isolated channel with common power
- D/I can be used as counter
- Communicatble via Modbus protocol
- Communication Interface: RS-485
- Din Rail Mount
Specifications
Digital Input | |
Input Channels | 14 |
Input Type | Sink or Source,Isolated channel with common power or ground |
Off Voltage Level | +1V Max |
On Voltage Level | +4 ~ +30V |
Input Impedance | 3K Ohms, 0.5W |
Counters | channels : 14 |
Max. Counts: 16-bit (65535) | |
Max. Input Frequency : 100Hz | |
Min. Pulse Width : 5ms | |
Isolation Voltage | 3750 Vrms |
Interface | |
Interface | RS-485 |
Format | N, 8, 1 |
Baud Rate | 1200 ~ 115200bps |
LED Display | |
1 LED as Power/ Communication indicator | |
14 LEDs as Digital Input indicators (for M-7041D) | |
Power | |
Input Voltage Range | 10 ~ 30 VDC |
Power Consumption | 0.2W (M-7041) / 0.9 W (M-7041D) |
Protocol | |
Support Modbus and DCON Protocol | Yes |
Environment | |
Operating Temperature | -25 ~ 75°C |
Storage Temperature | -40 ~ 85°C |
Humidity | 5 ~ 95% RH, non-condensing |