10/20-channel Analog Input Module with High Voltage Protection using the DCON and Modbus Protocols

M-7017Z - 10/20-channel Current and Voltage Analog Input Module, communicable over Modbus RTU and RS-485

10/20-channel Analog Input Module with High Voltage Protection using the DCON and Modbus Protocols

  Price:  $419.00  

Features

Application Image M-7017Z Analog input remote I/O

M-7017Z has software configurable channels-- from 10 differential channels into 20 single ended channels. Both voltage and current are accepted: ±150mV, ±500mV, ±1V, ±5V, ±10V, ±20mA , 0~20mA, and 4~20mA. No external resistor needed for measuring the current, all you have to do is to open the shell first and finish the setting by jumper. Measuring the current is as simple as you think! The M-7017Z also passes 240Vrms over voltage protection for differential inputs and 150Vrms over voltage protection for singleended inputs, 3000VDC intra-module isolation, +/-4KV contact ESD protection, +/-4KV EFT protection for power, and +/-1KV EFT protection for RS-485. The sampling rate of M-7017Z is changeable. There are fast mode and normal mode for your consideration. Fast Mode is 60Hz with 12 bit resolution. Normal Mode is 10Hz with 16 bit Resolution.

Applications

  • Energy Management
  • Remote Monitoring and Control
  • Industrial Automation

Specifications

Analog Input
Input Channels 10 differential or 20 single-ended (Note1), software selectable
Input Type ±500mV, ±1V, ±5V, ±10V, ±150mV
±20mA ,0~20mA, 4~20mA (jumper selectable)
Resolution 16-bit (Normal Mode) / 12-bit (Fast Mode)
Sampling Rate 10 samples/ second (Normal Mode) / 60 samples/ second (Fast Mode) total
Accuracy ±0.1% (Normal Mode) / ±0.5% (Fast Mode) or better
Band Width 15.7Hz (Normal Mode) / 78.7Hz (Fast Mode)
Zero Drift ±20uV/°C
Span Drift ±25ppm/°C
Input Impedance Voltage: 2M Ohms(Differential), 1M Ohms(Single-ended) /Current: 125 Ohms
Common Mode Rejection 86dB min.
Normal Mode Rejection 100dB
Over Voltage Protection Differential: 240 Vrms, Single-ended: 150Vrms
ESD Protection 4KV Contact for each terminal, and 8KV Air for random point
EFT Protection 4KV to Power, and 1KV to RS-485
Intra-module Isolation, Field to Logic 3000 VDC
Interface
Interface RS-485
Format N, 8, 1
Buad Rate 1200 ~ 115200bps
LED Display
1 LED Power/Communication indicator
Power
Input +10 to +30 VDC
Power Consumption 2.0W
Protocol
Support Modbus and DCON Protocol Yes
Watchdog Yes, Module, Communication (Programmable over DCON) firmware version B300 and later
Environment
Operating temperature -25 to 75°C
Storage temperature -40 to 85°C
Humidity 5% to 95%, non-condensing

Differential mode can be used for voltage input and current input. Single-Ended mode can be used for voltage input only.

Related Products


Customer Reviews


Reviews
- Write a Review - Sort by - Newest - Oldest - Highest Rated - Lowest Rated
Reviewed on 11-22-2017 at 09:14 AM

Michel Couillard - starstarstarstarstar 5 / 5

Very good service

Comment on this review

ICP DAS USA,Inc.