ISaGRAF Product Demos

ISaGRAF Product Demos

ISaGRAF Product Demos

Features

Maple Systems Modbus RTU Slave Guide

For the W-8xx7 / 8xx6

Project Name Description I/O Boards Or Complex Equipment Used
wdemo_01 R/W float value from file  
wdemo_02 R/W long integer value from file  
wdemo_03 To output something at a scheduled time interval :
For ex. Moday, 09:00 ~ 18:00, Sunday, 10:00 ~ …
 
wdemo_04 User defined Modbus protocol (No using "Mbus")  
wdemo_05 To do something at some sec later when an event happens I-8055
wdemo_06 Using Message Array - MsgAry_r , MsgAry_w  
wdemo_07 Convert float value to string, using real_str & rea_str2  
wdemo_08 PID control, refer to CD :
napdosisgrafwinconenglish_manu"PID...htm"
 
wdemo_09 Store & backup boolean & long integer value To/From files  
wdemo_10 Store & backup boolean & long integer value To/From EEPROM  
wdemo_11 Dir is Compact Flash ,save 3val to 3 file per 10min,change file name per month  
wdemo_12 Same as Wdemo_11,but Dir is CompactFlash (no blank between Compact & Flash)  
wdemo_13 record I-8081 ODM-2 's frequency into files for 5 seconds I-8081F2
I-8055
wdemo_14 Retain variable by Retain_b, Retain_N, Retain_f, Retain_t  
wdemo_16 Dir is Compact Flash ,save 3val to 1 file per min,change file name per day  
wdemo_17 Same as Wdemo_16,but Dir is CompactFlash (no blank between Compact & Flash)  
wdemo_18 Redundant Master & slave, WinCon + I-87K4/5/8/9 + I-87055, Master IP is 10.0.0.103, slave is 10.0.0.104  
wdemo_19 Send String to remote PC or controller via UDP/IP  
wdemo_19a Send String to remote PC or controller via UDP/IP  
wdemo_19b Send String to remote PC or controller via UDP/IP  
wdemo_20 receive String coming from remote PC or controller via UDP/IP  
wdemo_21 using "com_MRTU" to disable/enable Modbus RTU slave port,  
wdemo_22 PWM I/O demo. (Pulse Width Modulation), minimum scale is 2ms for WinCon I-8055
wdemo_23 Send time string to COM2:RS232 every second by COMOPEN & COMSTR_W  
wdemo_24 Send string to COM2 when alarm 1 to 8 happens (Access to variables as array) Slot 1 : I8077
wdemo_25 Redundant Master & slave, WinCon + I-87K4/5/8/9 + I-87055 Plus Modbus device Rdn
Bus7000
mbus
wdemo_26 To move some pulse at x-axis of I-8091 of slot 1 in W-8337/8737 I-8091
wdemo_27 Motion x, slot 1: I-8091, slot 2: I-8090, NapdosISaGRAF8000Drivermotion.pdf I-8091
I-8090
wdemo_28 Motion x-y, slot1: I-8091, slot2: I-8090, NapdosISaGRAF8000Drivermotion.pdf I-8091
I-8090
wdemo_29 Moving to he Abs. position when CMD is given, slot 1 : I-8091, slot 2: I-8090 I-8091
I-8090
wdemo_30 Link to two i8KE8 + I/O, IP one is 10.0.0.108, one is 10.0.0.109 I8ke
wdemo_31 Link to two i8KE8 + I/O, IP is 10.0.0.109 I8ke
wdemo_32 Set up W8xx7 as TCP/IP Client & link to other TCP/IP server (1 connection) Tcp_clie
wdemo_33 Same as Wdemo_32 but send message only when event last for larger than 3 second Tcp_clie
wdemo_35 display message to EKAN Modview LED mbus
wdemo_36 Read Real Val from Modbus RTU device mbus
wdemo_37 Write Real Val to Modbus RTU device mbus
wdemo_38 Using Modbus function code 6 to write 16 bits mbus
wdemo_39 I-8172 connecting FRNET I/O modules I-8172
back
For I-8417 / 8817 / 8437 / 8837 :
Project Name Description I/O Boards Or Complex Equipment Used
Demo_01 Timer Control Push4Key, 
Show3Led
Demo_01a To do something at some sec later when an event happens Push4Key, 
Show3Led
Demo_02 Start, Stop, & Reset Timer Push4Key, 
Show3Led
Demo_03 R/W System Date & Time 
To output at a scheduled time interval, For ex. Moday, 09:00 ~ 18:00, Sunday, 10:00 ~ …
 
Demo_04 Calculate Empty Cycle Time  
Demo_05 Blinking Output Push4Key, 
Show3Led
Demo_06 Change Output Mode Push4Key, 
Show3Led
Demo_07 Show A Value To S-MMI Push4Key, 
Show3Led
Demo_08 Input A Value To S-MMI Push4Key, 
Show3Led
Demo_09 Integer Calculation  
Demo_10 Display Analog Input Value To S-MMI I-87017,
I-87024,
Push4Key
Demo_11a Fbus Master, NET_ID = 1 Fbus_m,
Push4Key,
Show3Led
Demo_11b Fbus Slave, NET_ID = 2 Fbus_s,
Push4Key
Demo_12 Use COM3 To Receive User-Defined Command From PC Show3Led
Demo_13 Send User-Defined Data To PC Via COM3 Every 3 Seconds I-87017
Demo_14 Convert I-7000 & I-87xx Protocol To Modbus Protocol Bus7000
Demo_15a Link To Other Modbus Devices Mbus
Demo_15b Simulate I-8417 As A Modbus Device For Demo_15a To Link To This Project None
Demo_16 Periodic Pulse Generation, And Send Modbus Commands To Another Controller Push4Key,
Mbus
Demo_17 Read / Write EEPROM  
Demo_18 PID control  
Demo_21 Write one string to Com5 & Com6 Push4Key,
Show3Led
Demo_22 Receive message and echo back to Com5 or Com6 Show3Led
Demo_23 Receive a user defined protocol from PC Show3Led
Demo_27 Motion x, slot 0: I-8091, 
Slot 1 : I-8090, NapdosISaGRAF8000Drivermotion.pdf
I-8091
I-8090
Show3Led
Demo_27a Motion x, slot 0 : I-8091, 
NapdosISaGRAF8000Drivermotion.pdf
I-8091a
Show3Led
Demo_28 Motion x-y, slot0 : I-8091, slot1 : I-8090, 
NapdosISaGRAF8000Drivermotion.pdf
I-8091
I-8090
Show3Led
Demo_29 Store 1200 short-int values every 75 sec. and then send to PC via Com3 I-87017
Demo_30 Store 2880 short-int values every 18 sec. and then send to PC via Com3 I-8017h
Demo_31 Press push button 1 to send an email from Com4 of I-8xx7 controller Push4Key
Demo_32 Press Push button 1 or 2 or 3 to send emails to two users with multi-buffers Push4Key
Demo_33 R/W user defined protocol via Com3 Show3Led
Demo_34 ISaGRAF Spotlight Demo Push4Key
Show3Led
Demo_35a Time Synchronization : SA
Update Date & Time at this controller will sychronize date & time at SB
Fbus_m
Demo_35b Time Synchronization : SB Fbus_s
Demo_36 Get driver version of I-8xx7  
Demo_37 Spotlight demo Push4Key
Show3Led
Demo_38 I-8xx7 talks to the MMICON : Demo 1 MMICON
Demo_39 8xx7 talks to the MMICON : Demo 2 MMICON
Demo_40 store 8 A/I (binary) to S256 per min, then PC can load it by "ICPDAS UDloader" I-8017h
S256_512
Show3Led
Demo_41 Record Alarm (text) to S256/512 & PC can load it by "ICPDAS UDloader" S256_512
Show3Led
Demo_42 store 8 A/I (text) to S256 per min, then PC can load it by "ICPDAS UDloader" I-8017h
S256_512
Show3Led
Demo_43 SMS demo, Please declare your own phone No. in the dictionay, message type SMS
Show3Led
Push4key
Demo_44 Demo of PC to download data to the S256/512 Show3Led
Demo_46 Motion control :
Pulse move at a specified speed
I-8091
I-8090
Push4Key
Demo_49a Redundant : 8437/8837 redundant Master Bus7000
Ebus_m
Demo_49b Redundant : 8437/8837 redundant slave Bus7000
Ebus_s
Demo_50 PWM I/O demo. (Pulse Width Modulation) I-8055
Demo_52 Parallel D/I counter demo 1 at slot 0 (Counter Value is retained in this demo) I-8051
Push4Key
Demo_53 Parallel D/I counter demo 2 at slot 0 (high speed near 1K) (Not retained) I-8051
I-8056
Push4key
Demo_54a Modbus Master Mbus
Push4key
Demo_54b Modbus Slave  
Demo_55 PWM I/O demo 2. (Pulse Width Modulation) I-8055
Demo_58 Stepping motor controller Push4key
I-8041
Demo_59 Stepping motor controller Push4key
I-8041
Demo_61 DI counters using DI_CNT, 8xx7 + 8051
Do somethig when DI signal happens
I-8051
Demo_63 PWM & DI_CNT demo, ON & OFF time can be dynamically changed I-8055
Demo_70 Send string to COM3 when alarm 1 to 8 happens (Access to variables as array) Slot 1 : I-8077
 
back
For I-7188EG / 7188EGD :
Project Name Description I/O Boards Or Complex Equipment Used
Demo_01 Receive message and echo back to Com2 or Com3 For X503/4/5/6  
Demo_02 Write one string to Com5 & Com6 for X503  
Demo_03 Receive message and echo back to Com6 or Com7 (Access to variables as array)  
Demo_04 Convert I-7000 and insert X-board to I-7188EG Bus7000
X107
Demo_05 Timer Control X304
Demo_06 Show A Value To S-MMI X304
Demo_07 Control X107 & I-7060D Relay IO Bus7000
X107
Demo_08 Receive message and echo back to Com3 and control DO For X507/8/9. X507_8_9
Demo_09 Using S-MMI  
Demo_10 Display Analog Input Value To S-MMI  
Demo_11 Link To Other Modbus Devices mbus
Demo_12 Convert I-7000 and Display Analog Input Value To S-MMI For Training box Bus7000
Demo_13 Convert I-7000 and Display Analog Input Value To S-MMI For Training box I- Bus7000
Demo_18 PID control  
Demo_21 Write one string to Com3 & Com4 Xbi8
X50x
Demo_22 Receive message and echo back to Com3 or Com4 X50x
Demo_23 Receive a user defined protocol from PC X50x
Demo_35a Time Synchronization : SA
Update Date & Time at this controller will sychronize date & time at SB
Fbus_m
Demo_35b Time Synchronization : SB Fbus_s
Demo_36 Get driver version of I-7188EG  
Demo_41 Record Alarm (text) to X607/X608 & PC can load it by "ICPDAS UDloader" X607_608
Xbi8
Xbo8
Demo_43 SMS demo, Please declare your own phone No. in the dictionay, message type SMS
Xbi8
Xbo8
Demo_44 Demo of PC to download data to the X607/X608 X607_608
Xbo8
Demo_50 PWM I/O demo. (Pulse Width Modulation) I-8055
Demo_51a Redundant : I-7188EG redundant Master Bus7000
Ebus_m
Demo_51b Redundant: I-7188EG redundant slave Bus7000
Ebus_s
Demo_61 DI counters using DI_CNT, I-7188 + X107
Do somethig when DI signal happens
X107
 
back
For I-7188XG / 7188XGD :
Project Name Description I/O Boards Or Complex Equipment Used
Demo_01 Receive message and echo back to Com2 or Com3 For X503/4/5/6  
Demo_02 Write one string to Com5 & Com6 for X503  
Demo_03 Receive message and echo back to Com6 or Com7 (Access to variables as array)  
Demo_04 Convert I-7000 and insert X-board to I-7188EG Bus7000
X107
Demo_05 Timer Control X304
Demo_06 Show A Value To S-MMI X304
Demo_07 Control X107 & I-7060D Relay IO Bus7000
X107
Demo_08 Receive message and echo back to Com3 and control DO For X507/8/9. X507_8_9
Demo_09 Using S-MMI  
Demo_10 Display Analog Input Value To S-MMI  
Demo_11 Link To Other Modbus Devices mbus
Demo_12 Convert I-7000 and Display Analog Input Value To S-MMI For Training box Bus7000
Demo_18 PID control  
Demo_21 Write one string to Com3 & Com4 Xbi8
X50x
Demo_22 Receive message and echo back to Com3 or Com4 X50x
Demo_23 Receive a user defined protocol from PC X50x
Demo_35a Time Synchronization : SA
Update Date & Time at this controller will sychronize date & time at SB
Fbus_m
Demo_35b Time Synchronization : SB Fbus_s
Demo_36 Get driver version of I-7188EG  
Demo_41 Record Alarm (text) to X607/X608 & PC can load it by "ICPDAS UDloader" X607_608
Xbi8
Xbo8
Demo_43 SMS demo, Please declare your own phone No. in the dictionay, message type SMS
Xbi8
Xbo8
Demo_44 Demo of PC to download data to the X607/X608 X607_608
Xbo8
Demo_47a Redundant Master Bus7000
Fbus_m
I_7188XG
Demo_47b Redundant Slave Bus7000
Fbus_s
I_7188XG
Demo_48a Redundant: I-7188XG redundant Master Bus7000
Fbus_m
Demo_48b Redundant: I-7188XG redundant slave Bus7000
Fbus_s
Demo_50 PWM I/O demo. (Pulse Width Modulation) I-8055
Demo_61 DI counters using DI_CNT, I-7188 + X107
Do somethig when DI signal happens
X107
 
back
VB.NET program running at the same WinCon to communicate with ISaGRAF project :
There are several VB.NET example demo in the WinCon-8xx7 CD-ROM: napdosISaGRAFWinconVB.NET_Demo”. User can copy the files to your hard drive and open the *.sln file to run the project by Microsoft Visual Studio .Net 2003
Project Name Description I/O Boards Or Complex Equipment Used
vbdmo_01 VB.net demo 01: Digital output module (slot 1 : 8077) I-8077
vbdmo_02 VB.net demo 02: Change output mode (slot 1 : 8077) I-8077
vbdmo_03 VB.net demo 03: DIO demo (slot 1 : 8077) I-8077
vbdmo_05 VB.net demo 05: Analog output (slot 2 : 87024) I-87024
vbdmo_06 VB.net demo 06: Analog I/O (slot 2 : 87024 , 3 : 8017H) I-87024
I-8017H
vbdmo_07 VB.net demo 07: R/W long , float & Timer (No IO board)  
 
back

Specifications

WinCon Web HMI demo :
Project Name Description I/O Boards Or Complex Equipment Used
sample A Web HMI sample No I/O board
example1 A simple example listed in Chapter 4 slot 1 : I-8077
whmi_01 Display controller's date & time No I/O board
whmi_02 DI & DO demo slot 1 : I-8077
whmi_03 Read / Write Long, float & Timer value No I/O board
whmi_04 Read / Write controller's String No I/O board
whmi_05 Multi-Pages demo (slot 1 : I-8077)
Page menu is on the Left
slot 1 : I-8077
whmi_05a Multi-Pages demo (slot 1 : I-8077)
Page menu is on the Top
slot 1 : I-8077
whmi_06 AIO demo, scaling is in ISaGRAF slot 2 : I-87024
slot 3 : I-8017H
whmi_07 AIO demo, scaling is in PC slot 2 : I-87024
slot 3 : I-8017H
whmi_08 download controller's file to PC slot 1 : I-8077
whmi_09 pop up an alarm window on PC slot 1 : I-8077
whmi_11 Entering data to the controller and then store them into file. slot 1 : I-8077
ICP DAS USA,Inc.