The I-8014W is a high performance analog input module. Up to 16-channel single-ended or 8-channel differential inputs can be connected to one module. It features 16-bit resolution, 250Ks/s sampling rates, and 4K-sample FIFO. It provides isolation protection of 2500 Vrms.
The I-8014W contains an impressive scan function called Magic Scan, which is able to improve many of the functions and meets the demands of high-end users. The Magic Scan mechanism not only scans the different input channels at vastly different rates, but also at different gains. Even in a multi-channel scan, the sampling rates can be maintained at 250KS/s. The I-8014W contains two types of Magic Scan. One is a standard Scan and the other is a virtual Sample and hold function. Almost all AI Cards are expensive if they provide a sample and hold function, but ICP DAS can now provide you with a low-cost alternative.
The I-8014W provides 4K-sample onboard FIFO buffer for AD. The new FIFO technology uses a trigger interrupt signal. Meaning that if the sample count is higher than the pre-defined FIFO level, an interrupt signal will notify the host.
High accuracy, a high-speed sample rate, a high-level FIFO and all new Magic Scan technology are all included in the I-8014W,so It’s time to upgrade your analog input module to the I-8014W.
- 16-bit 250KHz ADC converter
- 16 single-ended/8 differential inputs (jumper selectable)
- 4K-samples FIFO buffer
- External trigger mode : post-trigger
- Input Range : +/- 10V, +/- 5V, +/- 2.5V, +/- 1.25V, +/- 20mA
- Internal/external trigger start
- Magic Scan Type
- Type 1: standard
Each Sample clock only samples a single.
- Type 1: standard
Fig.2: standard type
- Type 2: virtual Sample and hold
Each sample clock will to sample all scan channels that have been set.
Fig.3: Virtual Sample and hold type
- High speed data acquisition systems
- Vibration analysis
Reference & Support
|Input Channels||16-ch Single-ended/8-ch Differential|
|Input Range||+/- 10V, +/- 5V, +/- 2.5V, +/- 1.25V
-20mA ~ +20mA(Requires Optional External 125 Ohm Resistor)
|Sample Rate||Single Channel Polling Mode :250K S/s|
|Accuracy||0.05% of FSR +/- 1LSB|
|Scan Mode||Polling , Pacer|
|Scan Function||Magic Scan Type 1, Magic Scan Type 2|
|Overvoltage protection||+60 V~ -45 V|
|Input Impedance||20K,200K,20M(Jumper Select)|
|Intra-module Isolation, Field to Logic||2500 Vrms|
|1 LED as Power Indicator|
|Power Consumption||2.5W Max|
|Operating Temperature||-25 ~ 75°C|
|Storage Temperature||-30 ~ 85°C|
|Humidity||5 to 95% RH, Non-condensing|
|30mm x 102mm x 115mm (W x L x H)|
Rack Mount Embedded ...
The I-3625-ENC IP66 ...
24V , 0.2A 4.8W Powe...
24V , 1A 24W Power S...
24V , 1.7A 40.8W Pow...
Small Industrial Enc...