Download Now

Enter your information or login to view the document.


×
USB To HART Protocol Converter with Software Setup Utility. Compatible with USB 1.1 and 2.0 standard. Microsoft Windows 2000/Vista/XP/7 Drivers Included. Supports operating temperatures between -25 to 75°C (-13F ~ 167F).

I-7567

USB To HART Protocol Converter with Software Setup Utility. Compatible with USB 1.1 and 2.0 standard. Microsoft Windows 2000/Vista/XP/7 Drivers Included. Supports operating temperatures between -25 to 75°C (-13F ~ 167F).

  Price:  $759.00  

Fastest Delivery: (Details) X Delivery Details
We ship via UPS and fastest delivery is with Next Day Air. UPS Next Day Air Early typically gets their product to them as early as 8am, Next Day Air gets their product typically there by 10:30am and Next Day Air Saver typically by 3pm. We ship same day for in stock items and the lead time is up to one week for out of stock items. Delivery is dependent on UPS and your shipping method.
ADD TO CART
ADD TO CART
BUY BY 1-CLICK

Features

Application Image I-7567 USB to HART converter

The I-7567 is a USB to HART converter designed for the master device of HART protocol. It allows users to access the HART slave by using virtual COM-port. It can be used with HART slave devices like transmitters, actuators, current output devices, etc. It also comes with free utility tool for configuration.

  • Support HART Short/Long frame
  • Support HART Burst mode
  • Support point-to-point or multi-drop HART mode
  • Support connecting up to 15 HART slave devices
  • Allow two HART masters
  • Provide utility tool for module configuration and HART communication
  • No external power supply (powered by USB)
  • Support firmware update via USB
  • Provide PWR / Tx / Rx indication LED
  • 4KV ESD Protection
  • Selectable 250Ω load resistor

Utility

  • Search all HART devices automatically
  • Provide HART Universal & Common-Practice command (v6.0) for HART device configuration
  • Provide module configuration and HART communication easily and quickly
  • Provide data logging for HART communication

Applications

  • Current Measurement/li>
  • Petrochemical Industry Application
  • Environment Monitoring
  • Tunnel Monitoring
  • Building Monitoring
  • Monitoring systems

applications

The HART (Highway Addressable Remote Transducer) protocol uses the Bell 202 Frequency Shift Keying (FSK) standard to superimpose digital communication signals on the 4-20 mA loop current shown as below figure. HART communicates at 1200 bps without interrupting and interference with the 4-20mA signal and allows a host application (master) to send/receive digital information from a smart field device. The 4-20mA signal communicates the primary measured value - the fastest and most reliable industry standard. The digital signal can be used for additional device information including device status, diagnostics, additional measured or calculated values, etc. Therefore, the HART communication including analog and digital information provides a low-cost and very robust complete field communication solution that is easy to use and configure. HART is a master/slave protocol which provides for up to two masters (primary and secondary) and the secondary master such as handheld can be used to monitor/control the informatoin of HART bus. HART can be used in various modes such as point-to-point or multi-drop for communicating information to/from smart field instruments and central control or monitoring systems. The following are the description of two main HART operation modes.

  • Relatively easy to understand and use, the HART protocol provides access to the wealth of additional information (variables, diagnostics, calibration, etc.)
  • HART is a no risk solution for enhanced field communication
  • Compatibility with standard 4-20mA wiring
  • Simultaneous transmission of digital data
  • Risk reduction through a highly accurate and robust protocol
  • Increase Plant Availability
  • Reduce Maintenance Costs
  • Improve regulatory compliance

Specifications

USB Interface
USB Port
USB Type B
Compatibility
USB 1.1 and 2.0 standard
Virtual COM Parameter
1200 bps, O(odd parity), 8(data bit), 1(stop bit)
HART Interface
Channel
1
Connector
2-pin screwed terminal block
Terminator Resistor
Selectable 250 Ω terminal resistor
4KV ESD Protection
Yes, Contact for each terminal.
Isolation Voltage
3000 VDC
LED
LED Display
PWR : Power Indicator
Tx : Received Data from USB Indicator
Rx : Received Data from HART Indicator
Power
Power supply
By USB Interface
Power Consumption
Maximum : 1.5W
Software
Driver
Windows 2000 / XP / Vista / 7 (32/64 bit)
Mechanism
Installation
DIN-Rail or Wall Mounting
Dimensions
108 mm x 72 mm x 35 mm (H x W x D)
Environment
Operating Temp.
-25 ℃ ~ +75 ℃ (-13 to 167 ℉)
Storage Temp.
-30 ℃ ~ +75 ℃ (-22 to 167 ℉)
Humidity
5% ~ 95%, non-condensing

References and Support

Customer Reviews (0)

Be the first to leave a review.

Recently Viewed Items

×

Write a Review

Name


E-mail


Phone


Rating: out of 5 Stars
Review (max 1000 characters)

characters left