Power Supply, 85~264VAC to 24VDC/1.04A, 25W, DIN-Rail Mounting

GST25A24-DA1-DIN - Din Rail Mountable 24V/1A Power Supply

Power Supply, 85~264VAC to 24VDC/1.04A, 25W, DIN-Rail Mounting

  Price:  $89.00  

Features

  • Universal AC input I Full range
  • Protections: Short circuit I Overload I Over voltage
  • Fully enclosed plastic case
CE FCC RoHS WEEE

Introduction

DIN-KA52F is a 24V/1A Power Supply with Din Rail Mount. Supports a voltage input range between 100-250 VAC. Has 130 ~ 180% rated output power over-current protection, over-voltage protection, and 105 ~ 135% rated output voltage over-load protection. Supports a wide range of operating temperatures between 0°C ~ +50°C (32F ~ 122F).

Application Image DIN-KA52F

Load percent

Specifications

Input
Voltage range 100-250VAC
Frequency 50/60Hz
Input current 40A / 230VAC
LEAKAGE CURRENT(max.) 0.75mA / 240VAC
Output
Voltage 24VDC
Output current 1.04A
Ripple 180mVp-p
Over voltage protection Yes (clamp by Zener diode).
Over current protection 130 ~ 180% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
Over load protection 105 ~ 135% rated output voltage
Protection type : Recovers automatically after fault condition is removed
Temperature coefficient ±0.04%/°C (0~50°C)
Efficiency 82% (Typ.)
Hold-up time 16ms at full load
Line regulation ±1% (Line regulation is measured from low line to high line at rated load)
Load regulation ±2% (Load regulation is measured from 20% to 100% rated load)
General
MTBF 500Khrs min. MIL-HDBK-217F(25°C)
Environmental
Operating Temperature 0 °C ~ +50°C
Storage Temperature -20 °C ~ +85°C
Humidity 20% ~ 90% RH, non-condensing
Derating Derated from 100% at +38 °C
SAFETY & EMC
Safety standards UL60950-1, CSA C22.2, TUV EN60950-1, BSMI CNS14336 approved
Withstand voltage I/P-O/P:3KVAC , I/P-FG:1.5KVAC
Isolation resistance I/P-O/P, I/P-FG:100M Ohms / 500VDC / 25 / 70% RH
EMI conduction & radiation Compliance to EN55022 class B, FCC PART 15 / CISPR22 class B, CNS13438 class B
Harmonic current Compliance to EN61000-3-2,3
EMS IMMUNITY Compliance to EN61000-4-2,3,4,5,6,11, light industry level, criteria A

Related Products