F-8017C2
16-channel Isolated Current Input Redundant Module with 4 ~ 20mA input types. Works with iDCS-8000 Rugged Redundant I/O Rack.
No documentation or manuals for this item.
Features
The F-8017C2 is a 16-bit, 16-channel analog differential input module. This module accepts current input range 4 ~ 20mA and supports 25% over range measurement (Accuracy is not guaranteed). Besides, it has ±0.05% accuracy for highly accurate application. Moreover, this module provides 1kHz sampling rate for some application. The F-8017C2 provides 3000VDC optical isolation between channels and backplane bus. If any high voltage or current damages these channels, this module won’t affect other component in iDCS-8000 system.
- 16 current input channels
- 1kHz sampling rate
- Overrange measurement
- RoHS compliance
- 3000 VDC isolation from input to backplane
- 3000 VDC isolation from input to frame ground
- Redundancy
- Fast redundant switching time (<100us)
Specifications
Feature |
|
Redundant |
Yes (Switching time < 100us) |
Over-Current Protection |
Yes |
Termination board break off detection |
Yes |
LED indicator |
1 RUN, 1 ACT, 1 DUX |
Analog Input |
|
Number of channels |
16 |
Type |
4 ~ 20 mA (Support ±25% overrange) |
Maximum Allowable Input Current |
25 mA |
Resolution |
16 bit |
Sampling Rate |
1k Samples/sec (Total) |
Accuracy |
±0.05% FSR |
Zero Drift |
±20 μV/°C |
Normal Mode Rejection |
100 dB |
Common Mode Rejection |
86 dB |
Input Impedance |
230 Ω |
Data Range |
-2500 ~ 12500 (0~24mA) |
Isolation |
3000 VDC |
Certification |
|
EMC |
EN61000-6-2, EN61000-6-4, IEC/EN 61000-4-2, IEC/EN 61000-4-4 |
General |
|
Termination board |
DN-AIO-M |
Maximum power consumption |
1.5 W |
Operating temperature |
-25°C ~ +75°C |
Humidity |
5 ~ 95 % RH, Non-condensing |
Weight |
300 g |
Dimensions (W x L x H) |
30 mm x 85 mm x 115 mm |
References and Support
No documentation or manuals for this item.