Converters & Gateways

Our Converter & Gateway products allow for communication and conversion between a variety of protocols, including BACnet, CAN bus, DALI, DeviceNet, HART, and more. We supply high quality converters, gateways, and serial to Ethernet device servers for your various data conversion needs.

BACnet Converter Application Diagram

BACnet Gateways

We provide BACnet to Modbus Gateways for conversion between BACnet and Modbus protocols. BACnet protocol was designed to allow communication of building automation and control systems for applications such as heating, ventilating, and air-conditioning control, lighting control, access control, and fire detection systems and their associated equipment. The BACnet protocol provides mechanisms for computerized building automation devices to exchange information, regardless of the particular building service they perform.

BACnet Converter Application Diagram

All Products

Serial to Ethernet and Modbus RTU to Modbus TCP Converters

ICP DAS USA Serial to Ethernet and Modbus RTU to Modbus TCP Converters allow you to have your devices communicate across protocols. We offer Programmable 40 Mhz CPU 10 Base T Ethernet converters, Programmable 80 Mhz CPU 10/100 Base T Ethernet converters, Non-Programmable PoE 10/100 Base TX converters, and Non-Programmable PoE 10/100 Base TX Modbus RTU to Modbus TCP converters.

tDS-700 Application Diagram

All Products

USB Converters

ICP DAS USA provides USB Converters that function as signal conversion from USB to RS-232/422/485 or CAN industrial data communication. We also provide Industrial USB Hubs. Our USB converters are made of Fire Retardant Materials (UL94-V0 Level). We have serial to USB converters, RS-485 to USB converters, RS-232 to USB converters, and RS-422 to USB converters.

Serial to USB  Converter Application Diagram

All Products

CANBus Converters and Gateways

CANBus Converters and Gateways convert the Controller Area Network (CAN) network into RS-232, RS-422, RS-485, Modbus RTU and Modbus TCP interfaces.  CAN protocol supports distributed real-time control and multi-master capabilities.  You can use it for networking intelligent devices, data acquisition, controllers, sensors and actuators within a system or sub-system. ICP DAS USA provides a wide selection of CAN Communication Converters and Gateways including: CAN to Ethernet, CAN to Fiber, CAN to Modbus RTU, CAN to RS-232, CAN to RS-485, J1939 to Modbus RTU, CAN to Modbus TCP and more.

CAN Communication Converter Application Diagram

All Products

DALI Gateways

Our DALI Digital Addressable Lighting Interface Gateway products are widely used in the lighting industry and convert RS-232/485/USB to DALI protocol.

DALI gateway Application Diagram

All Products

J1939 to Modbus RTU Converters

These products provide a industrial data communication transformation between J1939 protocol and Modbus RTU protocol. We provide Utility software for users to configure the parameters of J1939 / Modbus RTU of GW-7228. The application fields can be Diesel power-train applications, In-Vehicle networks for trucks and buses, etc.

J1939 to Modbus RTU Converter Application Diagram

All Products

DeviceNet Gateway

ICP DAS USA provides DeviceNet to Modbus Gateways.  DeviceNet is a low level network that provides connections between simple industrial devices like sensors and actuators and higher level devices like controllers. DeviceNet has Master/Slave and Peer to Peer capabilities. DeviceNet Gateways are capable of brokering communication between DeviceNet protocol hardware, and ICP DAS DCON or Modbus protocol hardware.

DeviceNet Gateway Application Diagram

All Products

RS-232/422/485 Conversion Devices

ICP DAS USA provides a variety of RS-232 / RS-422 / RS-485 converters to meet almost any signal conversion you need!

Intelligent Communication Converter Application Diagram

All Products

EtherNet/IP Converters and Gateways

EtherNet/IP converters and gateways are useful in transferring data between Modbus RTU, Modbus TCP, and EtherNet/IP networks. Data is read from the registers of Modbus RTU slave devices and Modbus TCP servers and fed into the input registers of EtherNet/IP scanner devices.

Ethernet/IP converter diagram

All Products

HART Converters and Gateways

ICP DAS USA provices HART Gateways for conversion of HART to RS-232/422/485, Modbus RTU and Modbus TCP protocols and interfaces.  The HART (Highway Addressable Remote Transducer) protocol uses the Frequency Shift Keying (FSK) standard to superimpose digital communication signals on the 4-20 mA loop current.  

J1939 to Modbus RTU Converter Application Diagram

All Products

Modbus Converters and Gateways

ICP DAS USA's provides you with a wide range of converters and gateways to connect between CAN, COM, USB, or Ethernet type interface devices. Seamless data conversion with these CANbus devices allows you to integrate, transmit, and exchange data as ease.

Modbus converter diagram

All Products

PROFIBUS Converters and Gateways

ICP DAS USA carries a variety of PROFIBUS Converters and Gateways that can help you get time-critical and complex communications tasks across an array of devices.

Profibus Gateway Application Diagram

All Products

Profinet Converters and Gateways

Originating from the PROFIBUS Organization, PROFINET is an Industrial Ethernet standard capable in Real-Time Automation, PROFINET delivers the best it can offer in the fields of factory and process automation, safety and motion control applicatioins.

For pre-existing field systems such as PROFIBUS DP, PROFIBUS PA, AS-Interface, INTERBUS and DeviceNet, PROFINET allows for the integration of these technologies without incurring major changes to configuration and structure.

Profinet converter Application Diagram

All Products

Programmable Serial to Ethernet Device Servers

The PDS-700 series is a family of Programmable Device Servers, also known as "Serial-to-Ethernet gateway", that are designed for linking RS-232/422/485 devices to an Ethernet network.

Programmable Serial to Ethernet converter Application Diagram

All Products

Programmable Serial-to-Fiber Device Servers

The PDS-220Fx Serial to Fiber gateways are designed for adding optical fiber connectivity to RS-232/422/485 devices. The fiber-optic communications allows transmission over longer distances than other forms of communications because the signals travel along them with less loss and no crosstalk. It features immunity to electromagnetic interference (EMI) Motors, relays, welders and other industrial equipment generate a tremendous amount of electrical noise that can cause major problems with copper cabling.

Serial to fiber gateway application

All Products

Wi-Fi Converter

Our Wi-Fi converters add Wi-Fi capability to different protocol types. It connects the LAN wireless network with the Ethernet network.

Wi-Fi Converter Application Diagram

All Products

Shop by Protocol Converter Table
Search by ProtocolMultiple Protocols
Ethernet/IP Fiber
Hart Infrared
Modbus Profibus
Profinet RS-232
RS-422 J1939
RF RS-485