CAN-2015D
8-Channel (Differential) RTD Analag Input DeviceNet Slave module. 1.5 W. DIN-Rail mounted. Has operating temperature range of -25°C ~ +75°C (-13°F ~ +167°F)
Features
The CAN-2015D is an 8 Channel RTD Analog input DeviceNet slave device. RTD input status and configuration of CAN-2015D can be done through the EDS file. DeviceNet heartbeat and shutdown messages can also be done with this device.
This device is in compliance with DeviceNet specification Volume 1 Release 2.0 and Volume 2 Release 2.0, Errata 5. This is also a Group 2 Only Server (non-UCMM-capable) device. A predefined Master/Slave Connection Set is one of its features. Supported connections are the following: 1 connection for Explicit Messaging, 1 connection for Polled I/O, and 1 connection for Bit0Strobe I/O connection.
- DeviceNet general I/O slave devices
- Complies with DeviceNet specification Volume I Release 2.0 & Volume II Release 2.0, Errata 5
- Group 2 Only Server (non-UCMM-capable)
- Support Predefined Master/Slave Connection Set
- Connection supported
- 1 connection for Explicit Messaging
- 1 connection for Polled I/O
- 1 connection for Bit-strobe I/O connection
- Support DeviceNet heartbeat and shutdown messages
- Provide EDS file for DeviceNet master interface
Specifications
DeviceNet Interface |
|
Channels |
8 |
Wiring |
2/3 Wire |
Individual Channel |
Yes |
Sensor Type |
RTD (Pt100, Pt1000, Ni120, Cu100, Cu1000, Pt100) |
Voltage Input Range |
- |
Current Input Range | - |
Resolution | 16-bit |
Sampling Rate | 10 Hz |
Accuracy | ±0.05 % of FSR |
Zero Drift | ±0.5 μV/ °C |
Span Drift | ±20 μV/ °C |
Overvoltage Protection | 240 Vrms |
Input Impedence | 20 MΩ |
Common Mode Rejection | 150 d |
Normal Mode Rejection | 100 dB |
Communication |
|
Connector | 5-pin screwed terminal block (CAN_GND, CAN_L, CAN_SHLD, CAN_H, CAN_V+) |
Baud Rate (bps) | 125 k, 250 k, 500 k |
Terminator Resistor | Switch for 120 Ω terminator resistor |
Node ID | 0~63 selected by rotary switch |
Protocol | Volume I, Release 2.0 & Volume II, Release 2.0, Errata 5 |
DeviceNet Subscribe | Group 2 Only Server |
Explicit Connection | Yes |
Polled I/O Connection | Yes |
Bit-Strobe I/O Connection | Yes |
Heartbeat message | Yes |
Shutdown message | Yes |
System |
|
ESD Protection | 4 kV Contact for each channel |
Isolation | 3000 VDC for DC-to-DC, 2000 Vrms for bus-to-logic |
Watchdog |
Yes |
Power |
|
Input Range |
Unregulated +10 ~ +30 VDC |
Power Consumption |
1.5 W |
Mechanism |
|
Installation | DIN-Rail |
Dimensions |
33 mm x 107 mm x 102 mm ( W x L x H ) |
Environmental |
|
Operating Temperature |
-25°C ~ +75°C (-13°F ~ +167°F) |
Storage Temperature |
-30°C ~ +80°C (-22°F ~ +176°F) |
Ambient Relative Humidity |
10 ~ 90% RH, non-condensing |